|
Originally Posted by qes78
(Post 115913)
So I would summarize to say that the bare pump is all that is really needed, but the kit is preferred?
Any good place to recommend for its purchase? yes the kit is perfered. you have to cut the brass nozzle off the fuel rail, so they provide the extra fuel hose so you can attach it to the rail. plus a zip tie so you can hold to pump in place, a "sleeve" to dampen the sound, and a new "sock" filter. what it's an extra $5? |
Originally Posted by fmowry
(Post 115881)
Bare pump is all you need. You can use the stock sock, connector and rubber insulator. The pump is a bit longer so you'll have to bend the bottom bracket a bit.
Frank Another solution os to do what I did. I used a spacer and a longer machine screw down at the bottom and it works like a charm and looks factory... Not that anyone would notice it or anything. I think it would work just as good to use a hose clamp. |
Originally Posted by magnamx-5
(Post 115920)
Read the frigin thread. NEWB good damn it is like 10 posts up. Why is it so many people come here and act like they are so lost and this is rocket sceince how many times should we be forced to explain the same thing to the same person, cause they doubt or didn't read what we put up here before geez.
Any way lightning motorsports is prefered I apologise if I've upset you. What i was doing was just restating what was said to me, in different words, just to check that I had the correct understanding. The beauty of the forum is that folks can choose to reply or not. I will make sure that I prevent any such misunderstandings in future. Thanks for pointing out my oversight. Forums sure work different here than from home. I've checked Lightning, but the kit is for 94-97 miatas. I assume this is the same for pre 94 cars? |
Originally Posted by qes78
(Post 116365)
I've checked Lightning, but the kit is for 94-97 miatas. I assume this is the same for pre 94 cars?
|
Originally Posted by Braineack
(Post 116382)
yes. Everything about it is in my DIY FAQ, installation instructions are in my DIY PROJECTS thread.
|
I hear that....
|
| All times are GMT -4. The time now is 08:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands