Banjo Bolt for a Greddy TD05 Kit
#1
Banjo Bolt for a Greddy TD05 Kit
Guys,
I'm mailing from Ireland looking for a bit of Trans-Atlantic help!
I recently bought a second hand Japanese Greddy TD05 kit, but they never included the Bango (hollow) bolt that is used to connect the oil feed line to the turbo.
Does anyone know where I can get this bolt?
Failing that do you know the thread/size of the bolt so that I can try and match it?
Thanks,
Hugh
I'm mailing from Ireland looking for a bit of Trans-Atlantic help!
I recently bought a second hand Japanese Greddy TD05 kit, but they never included the Bango (hollow) bolt that is used to connect the oil feed line to the turbo.
Does anyone know where I can get this bolt?
Failing that do you know the thread/size of the bolt so that I can try and match it?
Thanks,
Hugh
#2
Unless this is a different Greddy kit it should be a TD04H-15. M10X1.25 is what is used on the turbo side.
You can buy a banjo bolt from places like Summit Racing, or in a pinch drill your own. You'll need 2 copper or aluminum washers for the banjo fitting. You shouldn't have too much trouble finding the bolt since it is a pretty common bit used in brakes.
Jay
You can buy a banjo bolt from places like Summit Racing, or in a pinch drill your own. You'll need 2 copper or aluminum washers for the banjo fitting. You shouldn't have too much trouble finding the bolt since it is a pretty common bit used in brakes.
Jay
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM