HKS turbo kit for 1.6 Q's
Hello,
I m new, my name is Achilleas from Greece. I recently bought a used HKS turbo kit for 1.6 Miata Anyone had experience with the above mentioned kit? Does the kit fit a 1.8 engine (friend wants to know)? Is the F-CON Mini included in the kit allready programmed? Is it re-programable? Where can I find an installation manual? Thank you in advance. I include some pics of the kit. http://img292.imageshack.us/img292/8393/p7190427oj6.jpg http://img410.imageshack.us/img410/4400/p7190429ys6.jpg http://img376.imageshack.us/img376/6937/p7190430eo9.jpg http://img339.imageshack.us/img339/7704/p7190433uo5.jpg http://img175.imageshack.us/img175/2205/p7190436pc4.jpg And some extras http://j-trade.cranky.jp/IMG_1398.JPG http://j-trade.cranky.jp/IMG_1443.JPG http://j-trade.cranky.jp/IMG_1223.JPG |
I don't know anything about the F-con. Try google search???? You might can find a forum that is familar to them. ( Is that made by greddy? You can get help online through their website if it is GReddy.)
As far as differances between the 1.6 liter and the 1.8. The manifolds are different. And there are a few diferances between the the years on 1.8 liter setup's. A post that will answer alot of questions is https://www.miataturbo.net/forum/showthread.php?t=4288 GOOD LUCK! And Welcome to the DARSIDE.......! |
The f-con is made by HKS....see that big HKS printed right above the "f-con" on the unit he's holding? :giggle: I don't know much about these either, and I doubt many on this forum will given we're all about Megasquirt.
Like Toddcod said you will need another manifold and also a downpipe to make this work with a 1.8L motor. You didn't get an intercooler with the kit? |
Thanx for the answers.
No, kit doesnt come with i/c. I ll have one custom made. Well, all I know about the F-Con is that you can tune fuel +/-16% and advance +/-4 degrees. I dont know if its allready tuned for the car (it has the specs on a sticker on it, writing NA6) and I dont know if/how I can change its program. |
Loot at here maybe can help you.
http://www.fd3s.net/fcon_install.html And if you are planing to sell some parts from that kit let me know. |
Originally Posted by KPLAFIN
(Post 309241)
The f-con is made by HKS....see that big HKS printed right above the "f-con" on the unit he's holding? :giggle: I don't know much about these either, and I doubt many on this forum will given we're all about Megasquirt.
Like Toddcod said you will need another manifold and also a downpipe to make this work with a 1.8L motor. You didn't get an intercooler with the kit? |
I've got the same problem, I'm looking for the installation manual of HKS FCON mini
please help .... |
The f-con Mini is a very basic fuel piggyback, I had one on my first turbo Miata and it was rock solid with 6psi. I might be able to find a wiring reference. Get me a better picture of the wires and I will look into it. Mine was from the early 90's and not sure if the wiring changed much.
|
I ll do that. Thank you.
|
|
Dude, you need to resize your pictures, it won't even fit on my screen!! But mine uses 8 wires and I will look at it tomorrow to see if they are all the same.
|
thanks buddy. wait for your good news.
|
any news ?
|
Anybody knows something about how is that F-Con thing connected to the OEM ECU???
|
Call up HKS, ask them for a wiring diagram if the dude you bought it from didnt give you one or try the HKS site. To answer your other question, if it came with the kit you bought its probably ready to go. Googling shows that you can get new ROM chips for it and nothing else.
|
Thanx!
|
The person i bought mine off said you had to retard the base timing a few degrees. Not sure if this is true or not?
|
Originally Posted by Ajb
(Post 321620)
The person i bought mine off said you had to retard the base timing a few degrees. Not sure if this is true or not?
|
I have found a partial wiring instruction for the ecu. My question is does it wire directly to the wires(cut to ecu) or does it just splice into them and share with the ecu ?
|
difficult to say cut it or splice it,
for example, airflow signal almost cut it and connect to IN and OUT of the external ECU, but RPM and electric +/- signal almost splice into the orignal wires. |
Sorry, been quite busy and it's getting cold here.
|
Originally Posted by Ajb
(Post 322908)
I have found a partial wiring instruction for the ecu. My question is does it wire directly to the wires(cut to ecu) or does it just splice into them and share with the ecu ?
Maybe together we will work it out:) |
I want it too~ my mail is gary@32db.com, thx
|
its not wiring diagram so to speak i have tags on the old ecu to tell me which wire they go to. Thing is for some reason not all the wires are used on my ecu as it was modified to run with higher fuel pressure and 1.8 injectors.
Maybe im using the 1.8 ECU , im not sure. I will e mail some pictures this weekend. |
The HKS FCon is preset, there are no adjustments. It controls fuel.
Mine had a plug spliced into the harness right at the ECU. It works very well if used as directed. I ran one of these 1.6 HKS kits for 75K with no issues whatsoever. Properly setup and tuned should net around 150-160 whp. and a very linear curve. |
|
Hope it will. Thank you!
|
What are you meant to do with the yellow pink and violet?
|
na6ce fcon mini wiring
Does any one know those remaining 3 wire?
|
just ignore them, that's useless on MX5.
|
thanks so i just tap it? any split?
|
just split them and tap it.
|
Parus,
You should have one of the moderators move this to the "Meet and Greet" section. Welcome to the forum. |
Necropost says, feed me brains!
|
Originally Posted by sixshooter
(Post 488636)
Parus,
You should have one of the moderators move this to the "Meet and Greet" section. Welcome to the forum. Done __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by jipznet
(Post 488458)
just split them and tap it.
thanks in advance, Jacko |
Originally Posted by jacko
(Post 488862)
i install HKS kits without wiring Fcon mini and engine is knocking when got boost will it help after wiring?
thanks in advance, Jacko http://www.nerve.com/CS/blogs/61fps/...1/facepalm.jpg |
Originally Posted by jipznet
(Post 488458)
just split them and tap it.
|
1 Attachment(s)
i found picture which exactly as my fcon without brown wire. what should i do?
|
Anyone can help me with this????
|
Originally Posted by jacko
(Post 497599)
Anyone can help me with this????
|
All times are GMT -4. The time now is 03:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands