|
Read his website. The $240 price is for just the mandrel-bent, tig-welded tubes; you need to source your own intercooler, clamps, hardware, etc. I think he wasn't making much of any profit off the whole kit for the $550 price.
|
it's easier to source to just source everythign and buy his pipes...it's the reason he's doing it that way anyways...instead of him sourcing it all, sitting on it and then just sending it your ways anyway.
|
If you read the thread you'd know the reduced cost is because it comes with pipes only. I don't think stripes wanted to hold a stockpile of intercoolers couplers and clamps he wasn't gonna make money on so he let people source it themselves. You're welcome
|
damn owe you a coke!
|
Dam. thats pricey : / lol Thanks for cleaing that up :D
|
then dulicate it yourself and stop complaining....if you excede the cost, precede to kick yourself.
|
Damn seems like people want everything for nothing these days. I guess that's what we have China for. Just the agrivation alone of thinking about getting pipes to fit in the tight spaces makes this kit worth the money. I didn't get done as much as I thought since I started at 9 and drank a bottle of champagne. Heres what I did:
Jacked the car up finally Took off the lower splash tray Made brackets Test fitted the piping going to the TB Here are the pics So here are some of the clearances. It looks like it's about a quarter inch everywhere and that's good enough for me. http://www.msprotege.com/members/mel...ercooler01.JPG http://www.msprotege.com/members/mel...ercooler03.JPG Thank god for e-code H4's http://www.msprotege.com/members/mel...ercooler02.JPG So I didn't really understand where the vertical brackets on mx5projects were supposed to go. Nonetheless I cut them to 5.25" and bent them at 1" with and made a hole with a 3/16" bit. Here is where I plant to bolt. Doing it this way I'll have to cut another long horizontal piece of 1/8" flatstock. Oh well http://www.msprotege.com/members/mel...ercooler04.JPG |
Those look like really nice couplers and clamps.
|
Originally Posted by ST2udent
(Post 118901)
Damn seems like people want everything for nothing these days. I guess that's what we have China for. Just the agrivation alone of thinking about getting pipes to fit in the tight spaces makes this kit worth the money. I didn't get done as much as I thought since I started at 9 and drank a bottle of champagne. Heres what I did:
Jacked the car up finally Took off the lower splash tray Made brackets Test fitted the piping going to the TB Here are the pics So here are some of the clearances. It looks like it's about a quarter inch everywhere and that's good enough for me. So I didn't really understand where the vertical brackets on mx5projects were supposed to go. Nonetheless I cut them to 5.25" and bent them at 1" with and made a hole with a 3/16" bit. Here is where I plant to bolt. Doing it this way I'll have to cut another long horizontal piece of 1/8" flatstock. Oh well |
I guess I never sent you install instructions. Your intercooler looks a little low and you may have clearance issues. I will send them to you now and also post them on my website for everyone to view.
Originally Posted by ST2udent
(Post 118901)
So I didn't really understand where the vertical brackets on mx5projects were supposed to go. Nonetheless I cut them to 5.25" and bent them at 1" with and made a hole with a 3/16" bit. Here is where I plant to bolt. Doing it this way I'll have to cut another long horizontal piece of 1/8" flatstock. Oh well
|
Sorry for the confusion, but this is an old link and needs to be removed:
http://www.mx5projects.com/Greddy%20Intercooler.asp People must be referencing this web page from old posts. I guess I need to put a redirect on it.
Originally Posted by Slidin'Miata916
(Post 118853)
when I go to http://www.mx5projects.com the price is like 240 then here its 550 http://www.mx5projects.com/Greddy%20Intercooler.asp Why? Is there a diff.? Thanks guys :D
|
Beautiful kit. I will be a future customer. Keep up the good work.
|
Thanks stripe. I can get a half inch more when I use the 1" bar stock I still have. This thread is the best advertising.
|
Hay, can you make me pipes for an intercooler if i give you the deminsions of it? its probably gonna be a stock front mount IC from an FC rx7
|
Looks like you have more clearance then me. I think i'm doing something wrong. I made the mistake of taking off the pipes after john helped me adjust them and now i cant get them back. Oh well at least they aren't rubbing anything....And they are shiny now too!
|
pics pics pics....make sure that you butt the pipes up to each other where couplers are needed...
|
I made some more progress tonight. I scrapped the old cross piece and used the flatstock. Here is the alternate bracket method I used. I didn't really measure other than getting the intercooler high and centered. The verticals were bent at 45* and use stock frame nuts. Braineack is right about not needing the lower brackets. It is quite immobile but can take vibrations. If you look at the picture I will have to groove out part of the hood latch bracket. I'd say other than that look out for clearance issues at the low pressure(larger) a/c hardline and the oil return which can get damaged quick from the alternator belt/pulley. I'll work on the compressor side piping tomorrow.
Quick question I hope someone can answer before I get going on it tomorrow. There are 2x 2" elbows; one with a small leg and one with a long leg. Which of these is used just after the very short 150* elbow coming off the compressor http://www.msprotege.com/members/mel...ercooler05.JPG |
Originally Posted by 92yella
(Post 118570)
Nice choice of beer:bigtu: That stuff flows like water here, they sell it with a local discount. How about $5.00 a sixer!:bowdown: I may just have to get on myself:)
Hehe no doubt you are a little bias. Northern Cali represent! I'm super stoked my local grocer is finally carrying sixers of the IPA and my bar now carries the imperial lager. My first experience with it was not so good though. I should be weary of any beer with the word "imperial" 1 pitcher imperial lager+smoking a sticky bone=:owned: |
The longer leg is used just after the compressor elbow.
Also, nice mounting bracket. If this works out for you, I may add this method to my website as another option.
Originally Posted by ST2udent
(Post 119277)
Quick question I hope someone can answer before I get going on it tomorrow.
There are 2x 2" elbows; one with a small leg and one with a long leg. Which of these is used just after the very short 150* elbow coming off the compressor |
Stripes. Is there still a 3 Week wait on shipping?
|
| All times are GMT -4. The time now is 12:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands