Req: 2nd opinion during BEGI-S install (INSERT HELP)
#1
Req: 2nd opinion during BEGI-S install (INSERT HELP)
Hi all,
I'm a few hours into my BEGI-S install on my 94 1.8. The O2 was a pain to get off, other parts went fine.
Just wanted to have a 2nd opinion on:
a) Is my oil feed on the right spot?
b) Is the _the_ place for the oil drain or am I off?
Thanks all!
I'm a few hours into my BEGI-S install on my 94 1.8. The O2 was a pain to get off, other parts went fine.
Just wanted to have a 2nd opinion on:
a) Is my oil feed on the right spot?
b) Is the _the_ place for the oil drain or am I off?
Thanks all!
#6
+1 on the drain. Id got in the dead center of top/bottom.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#8
As a quick note, please remember not to put that bracket on the metal water tube between the manifold and the head.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#9
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#14
Lol, wtf? You ok there Sam?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#20
Junior Member
iTrader: (1)
Join Date: Oct 2004
Location: Haarlem ,the Netherlands
Posts: 453
Total Cats: 0
This is the inside off the oil pan... The left top side is the transmission side.
The baffle inside the oilpan is not in its correct location...It has to be more to the left.
If you can avoid hitting the baffle you are in the right spot.
per FM instructions 2 inch below the screws off the oilpan.
Here is mine...
BTW the drainside (lowest point) off the oil pan should be enough to hold the 3.5 liters off oil.
http://img141.imageshack.us/img141/5...abflusslg4.jpg
(here is the 1.6 HKS oil drain, NOT A JOKE!!!)