Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Prefabbed Turbo Kits (https://www.miataturbo.net/prefabbed-turbo-kits-3/)
-   -   wich turbo for my goals and setup (https://www.miataturbo.net/prefabbed-turbo-kits-3/wich-turbo-my-goals-setup-33949/)

hustler 04-13-2009 02:00 PM


Originally Posted by 1990miata1.6 (Post 395285)
here is what i got for my miata at 20psi 4k to 8k on a gt2876r

Its going to be badass when you get to tell people that you're running 20psi. Its going to be cooler when I shit stomp a mudhole in your ass at less boost on a smaller turbo. Its going to be coolest when you tell people that you're running single-digit spark advance so you can run 20psi and not make enough output to bend rods.

thesnowboarder 04-13-2009 02:00 PM

2 Attachment(s)

Originally Posted by 1990miata1.6 (Post 395295)
I was told that the 323gtx rods were good and plus I got them for 100 bucks off a friend.

you and your friends are dumb fucks, here is why:

Attachment 206805
Attachment 206806

3k miles, 230whp, 2560r, 14 psi, 3 track days which means it saw more boost than you will out through your motor.


Good luck with that.

Savington 04-13-2009 02:02 PM

snowboarder is a huge flaming ------, your GTX rods will be totally fine at 400whp. Please get a GT3076, tune it for 13.5:1 AFRs (that's what those turbos like, just trust me) and drive it off a motherfucking cliff so we never have to see your stupid posts again

hustler 04-13-2009 02:02 PM


Originally Posted by 1990miata1.6 (Post 395295)
I was told that the 323gtx rods were good and plus I got them for 100 bucks off a friend.

read my earlier post where you are delivered from virgin perpetuity.

1990miata1.6 04-13-2009 02:07 PM

how did i know this was going to happen like always.

9671111 04-13-2009 02:12 PM


Originally Posted by 1990miata1.6 (Post 395302)
how did i know this was going to happen like always.

Because you know how people respond to idiots, and you kind of have a feeling you're a fucking idiot.

Dude, seriously, just run like 30psi and hook the compressor outlet up to your asshole.

1990miata1.6 04-13-2009 02:13 PM


Originally Posted by thesnowboarder (Post 395298)
you and your friends are dumb fucks, here is why:

http://i6.photobucket.com/albums/y23...IMG_0289-2.jpg
http://i6.photobucket.com/albums/y23...DSC00043-1.jpg

3k miles, 230whp, 2560r, 14 psi, 3 track days which means it saw more boost than you will out through your motor.


Good luck with that.

that suck for you but did you have any one check the rods for cracks. i have 4k on my motor and ran 20psi for 2 strait days then dropped it to 15psi and had no problems and i see redline every time i get in my car. i also ran a gt2560.

hustler 04-13-2009 02:13 PM


Originally Posted by Savington (Post 395300)
snowboarder is a huge flaming ------, your GTX rods will be totally fine at 400whp. Please get a GT3076, tune it for 13.5:1 AFRs (that's what those turbos like, just trust me) and drive it off a motherfucking cliff so we never have to see your stupid posts again

Well, snowboarder fucked something else up. I know my car made more power at 14:1 than 13.5, so I put it there and you're right about the more boost, the faster. I'd run 18psi or so at 14:0, not 20 though.

p.s. Snowboarder is gay, he touched me at the truckstop by the dumpster.

hustler 04-13-2009 02:15 PM


Originally Posted by 1990miata1.6 (Post 395305)
that suck for you but did you have any one check the rods for cracks. i have 4k on my motor and ran 20psi for 2 strait days then dropped it to 15psi and had no problems and i see redline every time i get in my car with a gt2560.

you're so fucking hardcore dude. OH MY MOTHERFUCKING KRISHNA, REDLINE EVERY TIME!?!?!?!?!?!?! That is so fucking hardcore, more hardcore than anything I've done on the track.

paul 04-13-2009 02:18 PM


Originally Posted by 1990miata1.6 (Post 395305)
that suck for you but did you have any one check the rods for cracks. i have 4k on my motor and ran 20psi for 2 strait days then dropped it to 15psi and had no problems and i see redline every time i get in my car. i also ran a gt2560.


Dude, even at 20psi you were only making 243rwhp IIRC. 20psi != 20psi != 20psi

hustler 04-13-2009 02:19 PM


Originally Posted by 1990miata1.6 (Post 395305)
that suck for you but did you have any one check the rods for cracks. i have 4k on my motor and ran 20psi for 2 strait days then dropped it to 15psi and had no problems and i see redline every time i get in my car. i also ran a gt2560.

I'm going to crack your fucking skull open and piss on your brain. DO YOU WANT A PIECE OF ME MOTHERFOCKER!?!?! Exactly, stfu and never post here again.

Oh, and congratulations on spelling "which" correctly. Obviously your mother neither drank nor smoked during your pregnancy.

1990miata1.6 04-13-2009 02:22 PM

i never said any thing about being hardcore all i was saying is i have not had a problem with my rods and its true i like bringing my car to redline. im not saying im trying to be hardcore in any way.

1990miata1.6 04-13-2009 02:28 PM

Paul im not able to advance my timing do to the link piggy back and its killing low end with the dropped comp pistons and the turner did not play with the ignition that was set for the stock 9.5:1 he just played with the air fuels. Then after I posted here on I dropped to 15psi and played with ignition and fuel myself and it made 225whp and I had left a safety buffer seeing how the link is not that great.

albumleaf 04-13-2009 02:33 PM

go back to miata.net

hustler 04-13-2009 02:34 PM


Originally Posted by 1990miata1.6 (Post 395318)
i never said any thing about being hardcore all i was saying is i have not had a problem with my rods and its true i like bringing my car to redline. im not saying im trying to be hardcore in any way.

Redline is pretty hardcore man. Better hope the welds in the manifold are in good shape.

1990miata1.6 04-13-2009 02:36 PM

no welds fm 1 cast manifold

1990miata1.6 04-13-2009 02:37 PM

sorry never posted in miata.net

hustler 04-13-2009 02:42 PM


Originally Posted by 1990miata1.6 (Post 395326)
no welds fm 1 cast manifold

I have 2 of them, the big ones. I had to overnight them from Japan though. You might also want to consider going with twins if you're trying to boost 20g's.

thesnowboarder 04-13-2009 02:59 PM


Originally Posted by hustler (Post 395306)
p.s. Snowboarder is gay, he touched me at the truckstop by the dumpster.

Do you not remember letting me ride on the back of your bike last year?

http://miamiherald.typepad.com/gayso...de_NYCR108.jpg

gtx rods are great, i just pulled my motor apart and realized i have STOCK rods so your actually golden.

hustler 04-13-2009 03:52 PM


Originally Posted by thesnowboarder (Post 395344)
Do you not remember letting me ride on the back of your bike last year?

http://miamiherald.typepaysouthflori...de_NYCR108.jpg

gtx rods are great, i just pulled my motor apart and realized i have STOCK rods so your actually golden.

http://i735.photobucket.com/albums/w...ne1/ixtqqh.gif


All times are GMT -4. The time now is 04:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands