Can anyone recommend a shop that is able to properly log a dyno run? So far, the shops that I have come across are only able to log the "basics"; hp/tq and AFR.

Located near Portland, OR. Willing to travel to as far North as Seattle, or South to the Bay area.

 

what's wrong with you logging your own runs?

 

Most shop's won't log anything more then AFR, boost, hp/tq. If you want more logged then that you need to do it with whatever ECU you run.

 

Is that how it is usually done? I'm a little old school and not particulary up to speed on data logging ecu's.

I'll have to consider coming into the new century and look into a MS, as most of you had recommended... Hell; I might just give up my old flip-phone for a Smart-phone!

 

Yeah, that's how its done.

I don't even know of a single shop that will give you an output of anything more than hp/tq and boost/afr

 

If the car is OBDii theoretically they can get anything the OBDii can output. The shop a dyno'ed the subaru at was kind of mad I wanted to be plugged in because it meant they had to calculate RPM. I dont know why they couldnt just put the inductive clamp on the signal wire going to one of the cops.