Why dont you just change the thread title to "TNTUBAs Faster Than Your Miata Build"?
|
4 Attachment(s)
Made some progress this weekend. I debured the block, painted it then proceeded to clean it
https://www.miataturbo.net/attachmen...ine=1327877406 Got the crank in. .0017ths on the mains is just where I wanted it. https://www.miataturbo.net/attachmen...ine=1327877406 As I was starting to check the rod bearing oil clearance I discovered that the oil jets were hitting the bottoms of the new Weisco pistons. So a quick trip to ACE Hardware Racing Supply for some 10mmx1.25 bolts and the oil jets are deleted. https://www.miataturbo.net/attachmen...ine=1327877406 And having not checked the mail yesterday I missed this came in. 70mm throttle bodies are SOOOO last year. https://www.miataturbo.net/attachmen...ine=1327877406 |
That TB is HUGE!
|
I meant to ask you last night if the Miata throttle cable gets along with the Mustang throttle cam, or did you have to commit chicanery to get them to work together?
I absolutely abhor the throttle linkage nonsense that the Uber kit uses, but I haven't sat down and figured out if I'm going to have Motion Pro make me a cable, or if I'm going to have to figure something else out. |
I had to make some very minor mods to make it fit my application. The stock throttle cable will slide right in but you need to make some minor mods to prevent the cable from coming out.
|
4 Attachment(s)
Short block is together
https://www.miataturbo.net/attachmen...ine=1328449248 https://www.miataturbo.net/attachmen...ine=1328449248 Just waiting on a few more parts before the head and blower go back on. So I went ahead and installed the RunCool hood louvers. https://www.miataturbo.net/attachmen...ine=1328449248 https://www.miataturbo.net/attachmen...ine=1328449248 |
Car is bad ass.
Are we going to get to see pics of finished engine compartment? |
The supercharger got back from the HighSpeed Lab this evening. I'm VERY anxious to see how it works out. I have VERY high hopes.
|
Go ahead and show them the outlet. They're gonna ---- sideways bricks.
|
I'm going to wait for dyno numbers before I post those pics ;)
|
4 Attachment(s)
The new engine, new transmission, new clutch and new diff are all in the car now. New dlerin and spherical bushings are installed as are new ball joints and inner and outer tie rod ends. Still have to install the cooling system, new blower and intercooler...then it's off to DIY in Atlanta on Tuesday to be tuned. I hope it makes about 175-180hp.
https://www.miataturbo.net/attachmen...ine=1330177390 https://www.miataturbo.net/attachmen...ine=1330177390 and a couple shots of the porting work on the blower. https://www.miataturbo.net/attachmen...ine=1330177390 https://www.miataturbo.net/attachmen...ine=1330177390 |
4 Attachment(s)
And I had someone ask me about the Greyhound stickers all over the car. Well if you think the car is fast...here are some pics of the ONLY really fast thing at my house.
https://www.miataturbo.net/attachmen...ine=1330178065 https://www.miataturbo.net/attachmen...ine=1330178065 https://www.miataturbo.net/attachmen...ine=1330178065 https://www.miataturbo.net/attachmen...ine=1330178065 And here are a few races from before she retired. Here track name was Mulberry Semerun. So to the earlier comment in this thread..."TNTUBA's dog is faster than your dog too" :) |
That is amazing...imagine what goes through those dogs heads when they trip. They are so full of determination!!!
|
They can go from 0 to 40+mph in 3 steps.
|
Originally Posted by TNTUBA
(Post 839580)
I hope it makes about 175-180hp.
|
Originally Posted by TNTUBA
(Post 839588)
They can go from 0 to 40+mph in 3 steps.
|
WOW...it has been a LONG 3 months since I started gathering parts for this build. I am REALLY glad the motor ran when I turned the key. Took it to the CRSCCA Test N Tune and was able to get the rings seated and some rough tuning done. Now I just have to change the Oil and filter again and get it to Atlanta to see what kind of power it will make. I can tell you just from driving it around today it's A WAY LOT STRONGER than it was with the other motor.
|
|
What'd it put down? Dyno graph?
|
Did I miss updates on this somewhere else? I'm really curious to see how it all turned out when tuned.
|
All times are GMT -4. The time now is 09:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands