Got to Drive the New National Corvette Museum Track (VIDEO)
Thread Starter
Junior Member
iTrader: (2)
Joined: Apr 2013
Posts: 49
Total Cats: 0
From: Louisville, KY
We did an event at the new NCM track in Bowling Green, KY last weekend with 10/10ths Motorsports. We ran the 3.2 mile Grand Full course. It rained for the first two days, but on Sunday we got some good weather and I got a few good laps in. Car was running rich because the air temp sensor had broken, unbeknownst to me.
Car has:
VVT swap and supporting mods, Bilstein HDs, ISC shock mounts, Height adjustable springs 650/425, Blackbird Fabworx lexan spoiler, RPF1s with Nitto NT01s
Here's a video of my fastest lap from the weekend...
Still plenty of time left out there but this is a decent start if you're planning on heading out.
Car has:
VVT swap and supporting mods, Bilstein HDs, ISC shock mounts, Height adjustable springs 650/425, Blackbird Fabworx lexan spoiler, RPF1s with Nitto NT01s
Here's a video of my fastest lap from the weekend...
Still plenty of time left out there but this is a decent start if you're planning on heading out.
Last edited by Mistamike17; Oct 18, 2014 at 01:08 PM.
I was also at that 10/10ths event with Mike. The track is WAY tighter than I was expecting based on video and track maps. It's a very technical course that's well-suited to our cars. I actually think it would be terrifying with corvette power levels lol.
Had a chance to visit the NCM and their new track few week-end ago during the 20th anniversary of the NCM. Track looks very nice but as a spectator, there's no good views/stands around the track.
Thanks for sharing
Thanks for sharing
Thread
Thread Starter
Forum
Replies
Last Post





Looks like fun though!
