NA Splitter Kits
#1
NA Splitter Kits
new to this site, and new to the miata, but not to tracking. Just trying to see what's everyone is doing in terms of using a splitter on their miata. Is there any market for a removable splitter kit? It would be removable so for those of you that DD your car, it can easily be removed and installed at the track. It will be constructed out of birch and fastened using aluminum and heavy duty steel.
#2
Trackdog racing makes splitters for certain lips on different body styles, but I have no clue what your car is because you have no signature, or location, or intro thread with pics.
I'd say make your own, and keep it cheap, because it will get trashed if you go off. Plus you can go further back on the chassis with your own.
I'd say make your own, and keep it cheap, because it will get trashed if you go off. Plus you can go further back on the chassis with your own.
#4
https://www.miataturbo.net/showthrea...highlight=aero
https://www.miataturbo.net/showthrea...highlight=aero
Don't be a fool, the search button is your tool. Douche
https://www.miataturbo.net/showthrea...highlight=aero
Don't be a fool, the search button is your tool. Douche
#5
look, i am not new to forums, i'm on like 10 other different ones, i was just inquiring to see if there was a market for a splitter kit. if you look at my introduction thread i've been tracking and competing for some time. I am seeing how many people will be interested in a removable splitter if i were to make a low cost kit for it.
#6
Trackdog racing makes splitters for certain lips on different body styles, but I have no clue what your car is because you have no signature, or location, or intro thread with pics.
I'd say make your own, and keep it cheap, because it will get trashed if you go off. Plus you can go further back on the chassis with your own.
I'd say make your own, and keep it cheap, because it will get trashed if you go off. Plus you can go further back on the chassis with your own.
#7
my kit will include a splitter constructed out of birch, aluminum and heavy duty steel mounting kit and an airdam. it was brought to my attention on another forum that many people have aftermarket bumpers so i will have to modify the airdam to fit those
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM