Paddle Shifter Kit for H-Pattern Transmissions
I'm putting this in the race prep section even though it isn't Miata specific. We can move it if deemed necessary.
This looks to only be available for cars with cable operated shifters now but is still very interesting. With the ability of the system to actuate the clutch and blip throttle or cut spark, this could probably speed up some of the lap times in certain classes where it is allowed. Poor man's sequential box? H-Paddle Shifter Kit - MME Motorsport http://www.mme-motorsport.com/en/ima...ftware-1.5.png http://www.mme-motorsport.com/en/ima...atalogging.png Clutch actuator: http://www.mme-motorsport.com/en/ima...tuator-cut.jpg Looks like they also make other things like wireless steering wheel buttons: Universal wireless steering wheel console - MME Motorsport http://www.mme-motorsport.com/en/ima...pc_cropped.jpg http://www.mme-motorsport.com/en/ima.../wpc/wpc-2.jpg |
This sucker shifts quickly.
Earlier prototype in action: |
That is awesome
|
Hmm, with a 6-speed and a rear gear matched to only use 3-4-5-6 on track, converting this to a 4 point H pattern would not be impossible (binary in two directions), disregarding all the tough testing/calibration, bent forks etc...
Using the normal shifter for 1 and 2 is no real issue, as long as it's possible to make manual shifting (outside of the controlled motion) possible at the same time. No major thought put into this post, just came to think of the simple pattern I use at track. |
Originally Posted by NiklasFalk
(Post 1450773)
Hmm, with a 6-speed and a rear gear matched to only use 3-4-5-6 on track, converting this to a 4 point H pattern would not be impossible (binary in two directions), disregarding all the tough testing/calibration, bent forks etc...
Using the normal shifter for 1 and 2 is no real issue, as long as it's possible to make manual shifting (outside of the controlled motion) possible at the same time. No major thought put into this post, just came to think of the simple pattern I use at track. https://www.miataturbo.net/suspensio...shifter-93080/ |
This was at SEMA this year
|
Originally Posted by Alta_Racer
(Post 1450982)
This was at SEMA this year
https://www.youtube.com/watch?v=DG12jmFsI7M |
If it works well its worth the $$.
|
All times are GMT -4. The time now is 11:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands