Quik Latch on NA bumper
#1
Quik Latch on NA bumper
I'm doing a quick disconnect bumper/splitter setup. The hard to reach bolts on the NA were rusted out so need to do something. Thinking Quik Latch setup with a bracket like the attached picture where those hard to reach bolts are. I'll likely make my own bracket that spans both holes in that hard to reach area. Add another quik latch where 2 is on the attached picture. Then a splitter disconnect like Nine Lives or Kazespec and call it a day.
Thoughts?
Front bumper
Rusted
Quik Latch
Thoughts?
Front bumper
Rusted
Quik Latch
#10
I have an NB2 and there was already a hole near where #2 was and was able to use that for my Quik Latch. It took some playing around with it to get the length right as the angle is a bit off for the cup to attach. In order to release the bumper I have to press hard on the bumper and then it is able to release. The gap is off just a tiny bit but that is most likely due to where I drilled the hole in the bumper.
Thread
Thread Starter
Forum
Replies
Last Post
RicanmiataRacer
DIY Turbo Discussion
7
09-14-2006 09:59 PM