Rs3 psi
So I have a set of 225/45/15 RS3s on the way. I just wanted to know what PSI you guys run them at for auto x and track days. Right now I have RE-11s and I used to run them at 32 hot and had no issues and good wear. My plan was to do the same with the RS3s but I didn't know if they would like more or less. Thanks
He's a noob that hasn't posted any useful piece of info since he joined. Doesn't even own a miata. Just check his posts.
5 e-bux says he's just spamming to post a for sale or want to buy ad.
5 e-bux says he's just spamming to post a for sale or want to buy ad.
I do own a Miata... and I haven't looked at the f/s or wtb.
Fwiw a local nationally prepped sts miata runs rs3s at 38-40 front 37-39 rear. Now that's with 750/400lb rates and he usually drops them down every run.
I ran them on an st integra and they seemed happiest at 33-36. It was about 55 degrees outside, 2 driver car.
Those rs3s transition so fast! The turn-in is amazing. Im wanting a set for the first set of tires for the 97.
I ran them on an st integra and they seemed happiest at 33-36. It was about 55 degrees outside, 2 driver car.
Those rs3s transition so fast! The turn-in is amazing. Im wanting a set for the first set of tires for the 97.
Not bad. How was the outerwear at that psi. The tire didnt roll over. I know on the RE-11 I am at or past those little arrows just a touch and thats at 32 hot. I would of killed the tire at 28 haha. But the rs2 and rs3 might have a stiffer sidewall. Thanks for the info btw.
Yeah I am going to start at 35 hot and work my way down. I think I might have a grassroot motorsports mag where they tested the tire so maybe that will have some helpful info. I know on the track I used to set the tire for 32 hot but it would come off at 35. You dont have this problem at auto x haha.







