Notices
Build Threads Building a motor? Post the progress here.

Anotha one. 2560 1.8

Thread Tools
 
Search this Thread
 
Old Oct 12, 2017 | 08:59 PM
  #61  
DNMakinson's Avatar
Elite Member
iTrader: (3)
 
Joined: Jan 2013
Posts: 5,030
Total Cats: 861
From: Seneca, SC
Default

Originally Posted by 18psi
way too hard to predict et so I usually don't.
I meant what ET did you run in MSM when you trapped 106
Old Oct 12, 2017 | 09:02 PM
  #62  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

I think it was 13.5 or 13.6
I was on 205 all seasons, they simply didn't grip at all, ever. I think the only pass I did decent was launching in 2nd
Old May 7, 2018 | 04:10 PM
  #63  
18psi's Avatar
VladiTuned
iTrader: (76)
 
Joined: Apr 2008
Posts: 35,821
Total Cats: 3,482
Default

Moving this to the builds section.

Re-Tuning OP's car, ran into a really weird issue and posting up to try to speed up diagnosis:

After his new engine, VE map is really odd. Car requires a LOT of fuel up to 100kpa, then requires VERY LITTLE VE in boost. We already diagnosed and replaced a dying fuel pump (or more likely just way too weak for this setup), but now his latest log shows a requirement of 100VE at idle, and only 94VE at 4k/10psi (or thereabouts).

Faulty FPR? (though logic dictates that the symptoms would be backwards if that was the case).

I will post a log when I get home.
Old May 7, 2018 | 04:48 PM
  #64  
DNMakinson's Avatar
Elite Member
iTrader: (3)
 
Joined: Jan 2013
Posts: 5,030
Total Cats: 861
From: Seneca, SC
Default

Maybe adding the FMU was not the right approach

Still the ID 725's? What is rest of fuel system? Post tune as well?
Old May 7, 2018 | 05:04 PM
  #65  
sixshooter's Avatar
Moderator
iTrader: (12)
 
Joined: Nov 2008
Posts: 22,204
Total Cats: 3,560
From: Tampa, Florida
Default

Yeah, if he has an FMU and it's adding fuel for you you would get what you're seeing.
Old May 7, 2018 | 07:26 PM
  #66  
sshamrockk's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2016
Posts: 297
Total Cats: 20
From: Western Mass.
Default

No FMU.

NA8 block, 84mm 8.6cr, bp4w head, ported with backcut and tapered stock size valves, ST double lite springs, FM Mani and DP IC pipes and IC, GTX2860r gen 2, NB fuel rail, 94 FPR(just tested today to be good) NB IM, ID725, DW200, LS2 Coils.

Ill let vlad upload tune as he hasnt sent me the revision he is talking about.
Old May 7, 2018 | 08:40 PM
  #67  
DNMakinson's Avatar
Elite Member
iTrader: (3)
 
Joined: Jan 2013
Posts: 5,030
Total Cats: 861
From: Seneca, SC
Default

Originally Posted by sixshooter
Yeah, if he has an FMU and it's adding fuel for you you would get what you're seeing.
I was joking.




All times are GMT -4. The time now is 11:54 PM.