When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am requesting a machine shop to create a stud that will let you install a knock sensor mount on the factory NB2 location.
The stud will be m8x1.25 on one end and m10x1.25 on the other end.
As this would be 'one-off', does anybody want one allocated for them before I only have 4-5 made? A mild steel stud would be ~$12 shipped. I am waiting for a quote on how much it'll cost to be made in stainless steel.
EDIT: The stud's been made. Please send me a PM if you are still interested
Last edited by skylinecalvin; 08-27-2021 at 06:27 PM.
The NB's (not sure about the other generations) have a factory knock sensor that's threaded for m10x1.5. It's near impossible to find a step stud that goes from M10x1.50 to M8x1.25 as such, I needed to have one custom made. This might be an NB block exclusive option.
I was considering using that as well and I have no doubts the engine mount location works... but for not much more work, I could retain the location that Mazda picked for the oem sensor. I also read placing the knock sensor closer/in-between cylinder 2/3 was ideal.
Made something like this at work. Took a 10x1.5 bolt, turned it down and threaded it with a die, cut the m10 bolt head off. Very effective, and for knock sensing, I would suggest this over welded bolts, however I’ve done that in a pinch.
I would be interested if stainless. Is the nb knock sensor thread pitch 1.25 or 1.5? Weird mazda would thread that particular hole .5 but rx7's use the opposite. Seems they would be the same. I was thinking of using this and just tapping for m8x1.25: https://www.belmetric.com/metric-thr...rrmslo1fobmpf0
The NB's (not sure about the other generations) have a factory knock sensor that's threaded for m10x1.5. It's near impossible to find a step stud that goes from M10x1.50 to M8x1.25 as such, I needed to have one custom made. This might be an NB block exclusive option.
Damn,, I am probably out then. I totally forgot the 1.8 had a dedicated mounting location. I am on a 1.6 for now unless someone know a super affordable 1.8 dealer!
Update for people who are interested. The shop gave me a 2-3 week lead time. It will be made out of 316SS. There was a $2 price difference in Mild Steel VS 316SS and so for the additional rust prevention, I figured SS would be better for the small increase in price. Once I get the part, i'll sell each at $12 shipped.
So to confirm this will let you fit a standard Bosch knock sensor to the nb2 location (that if I'm recalling correctly also exists on the NA8 blocks?) I.e. M10 for the engine side and M8 for the knocked side? If so put me down for one!