Hi guys, need help knowing where to run the rubber lines for the turbo such as wastegate etc.
First pic is hose from megasquirt tee'd off to the intake manifold and blow off valve.
second pic have a hose off the back of the intake manifold but not connected to anything.
third pic shows inlet fitting on charge pipe to turbo.
fourth pic shows top port and bottom port to wastegate.
last pic shows mac boost controller.
Any help will be greatly appreciated.

 

ECU to FPR/IM
Wastegate line in front of the TB, but after intercooler (because pressure drop), boost controller in between.
Blow off behind TB (IM side)