I have just finished putting together a harness for my emanage blue. When I fit the harness the car will crank over but it just wont start. I have checked the wiring and it all seems correct, but can somebody confirm that the injectors are supposed to be connected individualy or do you splice the 1 & 3 and 2 & 4 injector wires together? I have read the idiots guide to set up a the emanage on a 1.6 and injectors were wired in pairs?

Here is how I have the emanage connected to the ECU.

 

If you have a full schematic so that we can tell what wires go where and what year and model the car is, maybe someone can help.

 

Oops.My car is a 1997 (NA) 1.8 Here is a link to the wiring diagram, it starts on page 8.

http://www.madracki.com/miata/images/wiring/96sys.pdf

The car cranks over fine, it just doesnt start. Theres power to the Emanage, but thats about it.

 

After searching a lot forums, it would appear that a number of people have had problems with the MAF wiring. Would it be safe to remove the wire from the emanage, to rule out that being an issue? If it helps identify my problem here is a copy of the pinout used for the MSQ.