Hey there was wondering if a supercharger rebuild kit for a mini cooper eaton m45 supercharger will work for a JRSC supercharger (m45 or mp45)?

I am having a hard time even locating but one JRSC branded snout rebuild kit on the internet.

Reason for rebuild is that the supercharger is leaking a little bit of oil. I took the supercharger off and changed the oil, now it's leaking from behind the pulley. I am guessing I overfilled it, or it's just coicidental.

 

Call the people at jonbondperformance, they will have the parts you need.

 

Just an fyi: the generic kits for the m45 supercharger nose rebuild that you see on ebay will work just fine. I only used the oil, oil seal, and coupler in my refresh as the bearings that came with the kit were chinese. For 60 bucks I thought it was a decent deal.

 

I personally went with Track dog for my nose/Rear needle bearing rebuild. Went well, same parts jonbond sells... Just was cheaper, and Gary was way more open about how to change out the bearings/seals, and part numbers that I could cross to try and get at local parts stores.