daytona675

Hey All,

I recently got a 2000 with a supercharger that was running on bandaids. I have since decided that i would really prefer to have proper engine management and acquired a MSPNP2. Does anyone have a base map that would work for a 2000? We are running the injector dynamics injectors that seem to be the most popular ones around. Pulley we have on there was running about 11 pounds of boost.

If there is any more information you need please let me know and would love to find someone with similar setup and MSQ file I can borrow and use as a base tune.

Thanks!

Tyler

ryansmoneypit

iTrader: (6)

DIY autotune has them , download one. No map will have everything you need. you start with a base, something to hopefully get the car started, then you start to tune. You will have to enter things like; injector size, ignition type, O2sensor type etc..

daytona675

I used the stock Startup map from DIY and have the car running on that. But then when I put in the aftermarket injectors I am struggling to get it running. Was just hoping someone else with the supercharger had something similar that they could share so I would not have to set up everything from the DIY autotune base map.

Thanks!

MetalMuffins

iTrader: (1)

If you plan on doing the tuning yourself, I think it would be worth you putting the time in to learn how to tune from the DIY base map. It will give you a much better idea of what everything actually does and let you make more informed changes moving forward tuning it. There's a ton of knowledgeable people on this forum that will help you if you are putting in the time and effort to learn.

ryansmoneypit

iTrader: (6)

Not likely to happen here. we will guide and help, but we are busy, like you. so no, we wont just hand over your solution. In your statement above, you are basically telling us your too busy to learn.

What I would do if I were you: figure out why it wont run with the big injectors.


Have you performed the most basic steps, such as setting base timing, setting injector size, changing reqd. fuel and entering the most basic info about your wideband? have you don any of this yet?


The lack of response to your thread is directly related to you appearing to this community, to be lazy. Show your work. You didnt even upload a tune for us to look at.