Auto drivetrain to a manual trans
#1
Auto drivetrain to a manual trans
Hey guys if been wanting to upgrade my 1.6 drivetrain to the 1.8. Got a good deal on automatic transmission 1.8 drivetrain but dont know if the 1.8l automatic drvietrain will be a bolt on affair with my manual trans..
Basically wondering if the automatic dirvetrain will work on my 1.6l manual trans
Thank you for reading!! hope to hear from some of yall!
Basically wondering if the automatic dirvetrain will work on my 1.6l manual trans
Thank you for reading!! hope to hear from some of yall!
#2
Wat? Are you saying that you've got a 1.8 with auto trans, and want to take that engine and swap it into your already manual trans car? If I'm reading that right, you should be good to go. This article may help, but it should be basically a 1.6 to 1.8 swap.
https://www.miata.net/garage/auto_2_5_speed.html
https://www.flyinmiata.com/support/i...sc/1.8swap.pdf
https://www.miata.net/garage/auto_2_5_speed.html
https://www.flyinmiata.com/support/i...sc/1.8swap.pdf
#3
Let me explain it better my bad. But thank you for a response
my current set up 1.6l manual trans 1993
wanting 1.8l drivetrain driveshaft axles diff
got a good deal on 1.8l driveshaft axles and diff out of a 1996
but the components I got was out of a automatic 1.8l
wondering if they will still work with my manual 5 speed
my current set up 1.6l manual trans 1993
wanting 1.8l drivetrain driveshaft axles diff
got a good deal on 1.8l driveshaft axles and diff out of a 1996
but the components I got was out of a automatic 1.8l
wondering if they will still work with my manual 5 speed
#4
Let me explain it better my bad. But thank you for a response
my current set up 1.6l manual trans 1993
wanting 1.8l drivetrain driveshaft axles diff
got a good deal on 1.8l driveshaft axles and diff out of a 1996
but the components I got was out of a automatic 1.8l
wondering if they will still work with my manual 5 speed
my current set up 1.6l manual trans 1993
wanting 1.8l drivetrain driveshaft axles diff
got a good deal on 1.8l driveshaft axles and diff out of a 1996
but the components I got was out of a automatic 1.8l
wondering if they will still work with my manual 5 speed
Thread
Thread Starter
Forum
Replies
Last Post