bilstEin coilovers on budget
#22
They should not be anymore than $29-$30.
http://www.summitracing.com/parts/AAF-ALL64162/
http://www.summitracing.com/parts/AAF-ALL64180/
http://www.summitracing.com/parts/AAF-ALL64162/
http://www.summitracing.com/parts/AAF-ALL64180/
#31
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,076
Total Cats: 6,628
My guess would be from the road to the pinch weld at the bottom of the unibody, however I've never liked this system of measurement as it varies with tire diameter.
(On the other hand, if tire diameter is assumed to be a constant, then the pinch weld method is mush less imprecise than the hub-to-fender method, as the latter requires estimation of both hub center and which point along the radius of the rolled fender constitutes the datum.)
(On the other hand, if tire diameter is assumed to be a constant, then the pinch weld method is mush less imprecise than the hub-to-fender method, as the latter requires estimation of both hub center and which point along the radius of the rolled fender constitutes the datum.)
#32
on 15" wheels from ground to pinch welds.
I don't know, I just use whatever everyone else uses. I can't really accurately measure hub to fender because 6ULs stick out pretty far, plus there is no marking for the center of hub and you don't know if you are directly at the top of the fender. I think hub to fender thats like 12.75-13"? I can't remember exactly.
I don't know, I just use whatever everyone else uses. I can't really accurately measure hub to fender because 6ULs stick out pretty far, plus there is no marking for the center of hub and you don't know if you are directly at the top of the fender. I think hub to fender thats like 12.75-13"? I can't remember exactly.
#33
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,076
Total Cats: 6,628
And yes, I can attest to the limited suspension travel. I've got a set of FM springs on Bilsteins with FCM bumpstops and NB tophats, and at rest, you can see with the eye just how little "free" travel there is. And that's after I lathed up about 3/4" worth of spacers to raise the lower spring perch up beyond the highest "stock" ring.
A question for the ISC tophat crew- at what point, assuming a damper with a body equal in length to (or perhaps slightly shorter than) an NA-style Bilstein, do you start to run the risk of creating so much free travel that things other than the bumpstop start becoming travel-limiting components? (eg, hard things crashing into one another?)
A question for the ISC tophat crew- at what point, assuming a damper with a body equal in length to (or perhaps slightly shorter than) an NA-style Bilstein, do you start to run the risk of creating so much free travel that things other than the bumpstop start becoming travel-limiting components? (eg, hard things crashing into one another?)
#35
And to "answer" Joe's question, I think the tire will hit the fender somewhere well south of 11" (probably <9.5"?). And if you don't have fender liner, it will max out on the LCA, not sure what height that is (I am talking about height from hub to fender at contact point btw).
Btw, those numbers are not from experience. Its estimates based on shlammed folks at CR.
#39
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,076
Total Cats: 6,628
Bear in mind that shock body length does not directly correspond to static ride height, as it measures the height of the top of the shock body (the contact surface for the bumpstop) rather than the height of the spring perch. I'm sure everyone here knows that, but since I've heard ride heights being thrown around, just wanted to make sure we're all talking about the same thing.
My concern has entirely to do with the clearances between the various "hard parts" of the suspension system (including the tire-to-body clearance) when the system is in full compression, since the angle of the control arms and height (relative to body) of the hub will be significantly greater at full compression for a system using very short shock bodies or upper mounts with recessed bumpstop cavities (such as ISC) than one using stock-length shocks and stock upper mounts, even if both systems are adjusted to the same static ride height.
#40
Elite Member
Thread Starter
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
Well, I'm going to order ISC top mounts no matter what ride height I will end up at. Final ride height will be determined when I corner weight the car after suspension is installed