Clutchmax Flywheel
#1
Clutchmax Flywheel
Anyone have any experience with one of these?
https://clutchmax.net/products/copy-...wheel-lsf10036
I almost wrote it off as another cheap eBay/china flywheel, but…
I think I’m going to try it. If anyone has experience, let me know how it went!
https://clutchmax.net/products/copy-...wheel-lsf10036
I almost wrote it off as another cheap eBay/china flywheel, but…
I think I’m going to try it. If anyone has experience, let me know how it went!
Last edited by Jables; 01-31-2024 at 10:15 PM.
#2
I picked one up. Seems to be of decent quality!
Nicely machined. Threads are all clean for the pressure plate. Even came with new pressure plate hardware
My biggest worry was pilot bearing fitment. Glad that it seated nicely with an appropriate amount of pressure to install
I'll let you know if I have any vibration or clutch chatter. I'm using a Centerforce Dual Friction disc and pressure plate good for 290ft/lbs. So far, I'd recommend one!
Nicely machined. Threads are all clean for the pressure plate. Even came with new pressure plate hardware
My biggest worry was pilot bearing fitment. Glad that it seated nicely with an appropriate amount of pressure to install
I'll let you know if I have any vibration or clutch chatter. I'm using a Centerforce Dual Friction disc and pressure plate good for 290ft/lbs. So far, I'd recommend one!
Thread
Thread Starter
Forum
Replies
Last Post
Rallas
Suspension, Brakes, Drivetrain
29
10-28-2014 01:19 PM
Faded92mx5
Suspension, Brakes, Drivetrain
2
10-30-2008 05:16 PM