Why schrader valves on shocks?
#3
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,046
Total Cats: 6,607
Yup. I don't know if any of them actually came with these valves from the factory. All the ones I've seen have been added during a rebuild by someone like FatCat Motorsports.
#5
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,046
Total Cats: 6,607
When Bilstein assembles a shock, they have a magical machine that allows them to teleport the nitrogen gas into the bottom of a shock through the steel casing. Folks like Shaikh can't afford this technology, so they drill a hole in the bottom and fit a valve into it.
It's purely an affordance to allow the shock to be re-gassed after a rebuild. I've heard of folks adjusting the gas pressure as a tuning mechanism, but for me, that's a bit like adjusting the front/rear weight distribution by changing the amount of brake fluid sitting in the cup. (It's a far finer level of detail than I'll ever need.)
It's purely an affordance to allow the shock to be re-gassed after a rebuild. I've heard of folks adjusting the gas pressure as a tuning mechanism, but for me, that's a bit like adjusting the front/rear weight distribution by changing the amount of brake fluid sitting in the cup. (It's a far finer level of detail than I'll ever need.)
Last edited by Joe Perez; 06-25-2010 at 11:00 PM. Reason: schpelling
#7
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
Or maybe he doesn't use nitrogen
or maybe he has a nitronge-filled glove box
or maybe he backpurges them with nitrogen and holds them upside down to reassemble them
my advance-designs had the shrader valve. I busted one off once because it was too close to the mounting portion and ran into the lower suspension arm.
or maybe he has a nitronge-filled glove box
or maybe he backpurges them with nitrogen and holds them upside down to reassemble them
my advance-designs had the shrader valve. I busted one off once because it was too close to the mounting portion and ran into the lower suspension arm.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM