the 3X Clutchnet has two diaphragms :)

I installed a Carbonetics clutch after my Exide coun't keep up with 15 psi of boost any longer. In the beginning it engaged very fast, had to push the pedal to the floor and it would engage close to immediately. It needed bedding in, nowadays it engages like a stock one would. Took a couple of days of driving (normal driving, no burn-outs or whatever).

Rock solid clutch! Even driving in slow traffic and stop-start-stop driving in traffic jams is close to normal.

I dont know what "two" adjustments you refer to. I know only the one where you can spin the rod. That changes the engagement point and it changes the freeplay at the top.

Very interesting. I had no idea the height of the pedal can be regulated with the clutch switch.

clutch
 

i use the flying miata act 6 puck clutch on my 94 diy turbo :jerkit:

. High clamp force, lower friction with the SS(organic street disc) in the ZM2-XTSS is rated at 307 ft-lbs.

I have this clutch set up and all my cheap turbo miata friends hate me for it because its so easy to drive and it last and last with alot of abuse. i have had it for more than 45k with out a single problem. i have drag raced it well over 200 times and i have abused the hell out of it and it still feels new. it is real easy to drive in traffic and even my sister was able to drive it and she weighs 105 pounds. the pedal is a bit stiffer but after you drive for a week its like butter its feels normal and smooth. i guess your left leg just gets that much stronger. i cant drive a stock miata clutch it feels so weak to me now. the only down side is the price from $460 to $530 but i would pay the high price one time compared to my freinds that end up buying a cheap one every 15K-25K miles. but ACT is the best and all my friends now will save a bit more money to get ACT. my clutch is still good i wonder how much longer it will last.

I'll throw an update in here. I have 250 miles on my ZM1-XTMM. I love it. The clutch pedal has become much softer and the engagement point has moved up a little bit. Don't be afraid of the xtreme kit, it really isn't bad after it breaks in.

On a side note my trans really needed a flush. Buttery smooth shifting now. Feels weird to roll up to a light and 1st just drops into place.

Ha, mine goes in first with no effort if I'm rolling less than 20. Good transmission.

That is how mine is now. I keep thinking something is wrong.

So many people put clutches in and never adjust the travel.
This is a must. Good info.

I vote for ACT that is what i had i was very happy with it.

I had a friend with that EXACT absolutely the same situation...drove that thing..HOLY HELL!!!! Id rather drive an auto than his integra, it was the worst fucking clutch ive ever felt

Was it a solid puck or a sprung puck?

I drove a miata with an ACT HD 4-puck unsprung disc this weekend. Was easier than my ACT HD with a clutchnet 6-puck sprung disc. I assume it's the friction material as I have a clutchnet disc, however the same PP.

I went back in and readjusted my engagement rod length, it's at a typical height now, still grabs but it's a lot easier to deal with.

Honestly, my dad drives this car a lot. If he can do it without issues or complaining, anyone can.

Braineack,

How did your F1 clutch perform? Did you run one of their flywheels too?

what makes you think I'd ever ran a F1 clutch?

the F1 Clutch is an oem rated PP with the same exact disc I'm using. I've driven a miata with one, felt just like any 6-puck, with a soft pedal.

I interpreted your post about driving an F1 clutch as having one.

Interested in impressions of F1 stuff.

May try their flywheel but havent used or seen any of their stuff.

So what was the final outcome of the Clutchnet stuff? Poor tolerances in their product caused problems or are some people successfully running them?

It's random. Some people had zero issues, others didn't have that luck.

it seems the PP design is to blame, I'm still using the disc I bought with an ACT PP.