Identify this differential
6 Attachment(s)
I bought a car and parted it out a while back. The guy I bought it from claimed that it had a rx7 differential in it. After doing some research, I found that it was owned by a drifter named ej. In the video he said it had a kaaz 1.5 differential.
I've looked at pictures to try to see if I can identify it. It looks like a kaaz from pictures I've seen. I couldn't find any marking to identify it. So can anyone confirm that this is a kaaz or rx7 or what? https://www.miataturbo.net/attachmen...ine=1370280999 https://www.miataturbo.net/attachmen...ine=1370280999 https://www.miataturbo.net/attachmen...ine=1370280999 |
pretty sure its not An Rx7. If I remember right the Rx7 clutch type has a cast like housing rather than looking like it was machined from billet.
|
From the pictures I think it could also be an OS-Giken
|
1 Attachment(s)
I think it could be an OS Giken
For reference - OS Giken, KAAZ, AE86 diff https://www.miataturbo.net/attachmen...ine=1370324679 |
That's interesting. Is there another angle I could take a picture of to help identify?
|
I say KAAZ, as it's less rounded. Just like in the Giken vs KAAZ picture.
|
1 Attachment(s)
Take a closer picture of the adjuster thing in the middle. It will tell how the diff is setup.
https://www.miataturbo.net/attachmen...ine=1370328912 |
4 Attachment(s)
Here is my diff too. Came from a japanese car. It is a 1.5 way for sure. Didn't manage to identify it though.
https://www.miataturbo.net/attachmen...ine=1370333781 https://www.miataturbo.net/attachmen...ine=1370333781 |
Its a Salisbury type of some sort. It is not a giken, the giken have a sort of textured finish on them and say giken on them, and the salisbury cam setup doesnt look as clean and professional as a giken. Could be a kaas or custco.
|
3 Attachment(s)
|
Originally Posted by soviet
(Post 1018036)
I think it could be an OS Giken
For reference - OS Giken, KAAZ, AE86 diff https://www.miataturbo.net/attachmen...ine=1370324679 I also seem to remember OS giken logo laser etched into the cover plate on the drive flange side of the diff. Looked like the Picture on 949's website. |
Yeah the middle one looks more like a giken in that picture.
|
Originally Posted by Leafy
(Post 1018193)
Yeah the middle one looks more like a giken in that picture.
Pretty sure the OP's diff is a Kaaz. |
Yeah, I messed up the order.
|
Originally Posted by soviet
(Post 1018232)
Yeah, I messed up the order.
|
I'd rather have the kaaz than the rx7, but I'd rather have the torsen over both of them unless the car had to be setup in a way that could just not keep the inside rear down then I would favor the kaaz.
|
Anything is better then an open.
If you don't keep the diff, what do you plan on getting? |
sell the KAAZ on cr.net, buy diff of choice?
|
Welded ;)
Ill probably use it but if I plan to get another I might consider a giken. But just because of what I've read of kaaz vs giken. I don't know enough about differentials now to know what would be better. |
Originally Posted by Dot3
(Post 1018298)
Welded ;)
Ill probably use it but if I plan to get another I might consider a giken. But just because of what I've read of kaaz vs giken. I don't know enough about differentials now to know what would be better. I wouldn't mind welded, I have a strong hate for my open. |
All times are GMT -4. The time now is 09:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands