Rear wheel studs for NB
04-14-2022, 06:53 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Posts: 1,219
Total Cats: 103
Rear wheel studs for NB
Gentlemen,
I want to try my hand at building (rebuilding) a complete rear suspension knuckle with a new bearing, hub, seals, etc. I'd also like to use a longer wheel stud. I spent some time on the interwebs and the ARP 100-7720 packs will not ship until the end of June from any reputable vendor. The Dorman 610-416 is long enough, but the section above the knurl would have to be ground down a bit to clear the holes in the brake disc. It seems that the threads about using F-Body or RX-7 studs don't take into account the larger knurl diameter of the NB rear. Can someone please pass me the actual part number/description of an alternative that fits the rear of an NB.
Thanks much,
I want to try my hand at building (rebuilding) a complete rear suspension knuckle with a new bearing, hub, seals, etc. I'd also like to use a longer wheel stud. I spent some time on the interwebs and the ARP 100-7720 packs will not ship until the end of June from any reputable vendor. The Dorman 610-416 is long enough, but the section above the knurl would have to be ground down a bit to clear the holes in the brake disc. It seems that the threads about using F-Body or RX-7 studs don't take into account the larger knurl diameter of the NB rear. Can someone please pass me the actual part number/description of an alternative that fits the rear of an NB.
Thanks much,
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
hustler
Suspension, Brakes, Drivetrain
29
06-26-2013 11:45 AM
joemiata
Miata parts for sale/trade
4
03-10-2013 01:51 AM
