Subaru 4 pot brake brackets
Thread Starter
Elite Member
iTrader: (24)
Joined: Jun 2007
Posts: 4,667
Total Cats: 18
From: Woodland Hills, CA
Subaru 4 pot brake brackets
Came across these on Facebook. Looks like an interesting low-cost option for people on the budget.
Subaru 4 pot calliper conversion brackets
£50 plus postage
These 8mm thick brackets made from mild steel have been manufactured to allow you to run 300 mm mtech discs from eBay (£70) link below
These have been used on a car I run for a while now successfully
However I would advise that these are only used for track use only the same warning you get when you fit Meister R suspension, get the idea.
Brackets will be supplied with high tensile bolts.
The callipers are classic Subaru 4 pots from 1992+ Impreza or legacy.
This setup will fit under 15s
https://rover.ebay.com/rover/0/0/0…
Private Message me for more information.
£50 plus postage
These 8mm thick brackets made from mild steel have been manufactured to allow you to run 300 mm mtech discs from eBay (£70) link below
These have been used on a car I run for a while now successfully
However I would advise that these are only used for track use only the same warning you get when you fit Meister R suspension, get the idea.
Brackets will be supplied with high tensile bolts.
The callipers are classic Subaru 4 pots from 1992+ Impreza or legacy.
This setup will fit under 15s
https://rover.ebay.com/rover/0/0/0…
Private Message me for more information.
Reply
0
0
That guy is shady as ****, won't tell you what the rotors are off of, have to commit to a purchase then he'll send you an eBay link for slotted rotors.
Look up pads for those calipers, at the time i looked he wouldn't even tell you which Subaru calipers they were but they are all in the 200$+ range for race pads. The calipers also cost as much as willwoods too. That killed the swap for me.
I would like to know what OEM application those rotors are for.
Look up pads for those calipers, at the time i looked he wouldn't even tell you which Subaru calipers they were but they are all in the 200$+ range for race pads. The calipers also cost as much as willwoods too. That killed the swap for me.
I would like to know what OEM application those rotors are for.
Reply
0
0
Elite Member
Joined: Jul 2014
Posts: 1,604
Total Cats: 248
From: Canberra, sort of
Renault Grand Scenic one piece rotors, I hear.
ETA (for completeness): Single piece Grand Scenic1.5DCi Front Drilled Grooved Brake Discs 04, 300mm x 24mm 4 stud vented discs. Fleabay listing here, if anyone is interested.
Very heavy would be my guess.
ETA (for completeness): Single piece Grand Scenic1.5DCi Front Drilled Grooved Brake Discs 04, 300mm x 24mm 4 stud vented discs. Fleabay listing here, if anyone is interested.
Very heavy would be my guess.
Last edited by Gee Emm; Apr 11, 2018 at 08:02 AM. Reason: Additional info
Reply
1
1
Thread
Thread Starter
Forum
Replies
Last Post
soflarick
Miata parts for sale/trade
9
Feb 4, 2008 06:01 PM
