I got a 97 and was swapping in a torsen in and both axles are seized in the hubs so I need new parts. I can get axles at Autozone. Was there any changes in the uprights on the 90-93 to the 94-97 or could I use any 90-97 upright (knuckle).

 

Nobody know if the upright are the same from 91-93 to 94-97?

Thanks!

 

should work no problem.

 

Only variable would be ABS vs Non-ABS for the threaded boss for the speed sensor. Otherwise completely cross-compatible.

 

AFAIK there are no differences. The NB spindles are different (wider by 5mm).

 

Thanks guys!