wurth hhs-k for poly bushings?
Wurth HHS-K High Pressure Lubricanting Oil - 893106050
Wondering if anyone has used Wurth HHS-K lubricant for their poly bushings. Supposedly creeps very well, then as the solvent evaps, it leaves a relatively long lasting layer of lubricant. I know it isn't terribly labor intensive to just pull the pins out of my a-arms and grease them with hyperlube, but this would be even easier than that...maybe. Thoughts? |
Originally Posted by monkeywinky
(Post 1158615)
Wurth HHS-K High Pressure Lubricanting Oil - 893106050
Wondering if anyone has used Wurth HHS-K lubricant for their poly bushings. Supposedly creeps very well, then as the solvent evaps, it leaves a relatively long lasting layer of lubricant. I know it isn't terribly labor intensive to just pull the pins out of my a-arms and grease them with hyperlube, but this would be even easier than that...maybe. Thoughts? |
Your assumption is correct- I did not install zerk fittings.
|
install zerk fittings now without removing the bushings.
I think superlube is the recommended grease gun lube IIRC. |
All times are GMT -4. The time now is 03:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands