wurth hhs-k for poly bushings?
08-18-2014, 03:44 PM
#1
Junior Member
Thread Starter
Join Date: May 2011
Posts: 66
Total Cats: 0
wurth hhs-k for poly bushings?
Wurth HHS-K High Pressure Lubricanting Oil - 893106050
Wondering if anyone has used Wurth HHS-K lubricant for their poly bushings.
Supposedly creeps very well, then as the solvent evaps, it leaves a relatively long lasting layer of lubricant.
I know it isn't terribly labor intensive to just pull the pins out of my a-arms and grease them with hyperlube, but this would be even easier than that...maybe. Thoughts?
Wondering if anyone has used Wurth HHS-K lubricant for their poly bushings.
Supposedly creeps very well, then as the solvent evaps, it leaves a relatively long lasting layer of lubricant.
I know it isn't terribly labor intensive to just pull the pins out of my a-arms and grease them with hyperlube, but this would be even easier than that...maybe. Thoughts?
Reply
0
0
08-18-2014, 04:04 PM
#2
Wurth HHS-K High Pressure Lubricanting Oil - 893106050
Wondering if anyone has used Wurth HHS-K lubricant for their poly bushings.
Supposedly creeps very well, then as the solvent evaps, it leaves a relatively long lasting layer of lubricant.
I know it isn't terribly labor intensive to just pull the pins out of my a-arms and grease them with hyperlube, but this would be even easier than that...maybe. Thoughts?
Wondering if anyone has used Wurth HHS-K lubricant for their poly bushings.
Supposedly creeps very well, then as the solvent evaps, it leaves a relatively long lasting layer of lubricant.
I know it isn't terribly labor intensive to just pull the pins out of my a-arms and grease them with hyperlube, but this would be even easier than that...maybe. Thoughts?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
