Built Engine Parts Packages from Trackspeed Engineering
 

Trackspeed's experience building race-winning engines for naturally aspirated and forced induction applications is well-known on the forums, but the same parts that go into our race motors are also available for purchase separately. To help more people put together their own quality engines at a reasonable cost, we've assembled a few parts packages and taken a few dollars off of our already competitive pricing.

In other words, press the easy button, order a package, and get all the aftermarket bits you need to assemble a great engine for your own car while knowing that a race-winning engine builder picked the right parts for your build. :)

Stage 1 - Normal price $1129 - Package price $1050:

• Supertech Pistons with rings
• Manley H-Beam Forged Rods
• ACL RACE Standard Bearings
• Gates Racing Kevlar Timing Belt
• Gates cast-impeller water pump
• Koyo/NTN Idler and Tensioner pulleys (OEM)

Stage 2 - Normal price $1351 - Package price $1250

• All Stage 1 items
• ARP Head Studs
• ARP Main Studs

Stage 3 - Normal price $1790 - Package price $1650

• All Stage 2 items
• Boundary Engineering Street/Strip Oil Pump

Call, email, or PM to place an order. :party:

So do we send you a fully running motor, or can we send a bare block and crank?

These packages are parts only, obviously. You buy a package, parts arrive at your house or office, you bring them to your engine builder or use them to assemble an engine yourself.

We do build complete engines as well, but not at these prices of course. Our assembled shortblocks start at $2600, and our longblocks start at $4000. We only accept full, running cores for engines that we're assembling.

I don't think I see any engine rebuild kits (aka: gaskets) on your site. I'm not asking you to carry them, I could see why you probably wouldn't make any profit. But is there one in particular you would recommend buying along with the bearing/ring/piston/rod packages listed above?

I use Mazda OEM gaskets, which are available fairly inexpensively if you have a Mazdacomp account. The only exception is for large-bore head gaskets (85.0 and 85.5mm), which I do carry.

Sav can you clear some pm's??

Done, sorry.

Oh, now after I built my motor you offer this.. I see how it is.