Rota Grid Offroad | Toyo R1R
Finally got the Grid's in last week. Running 225/45/16 R1R's. at approx. 12"F 12.5"R. All fenders are rolled and I'm dealing with a little rubbing in the front where the R-package front lip screws in. Going to attempt to continue massaging til they fit perfectly.
http://i31.tinypic.com/2qxpz7l.jpg http://i28.tinypic.com/282nwc8.jpg http://i28.tinypic.com/qzrgxx.jpg |
Moar Camber....
I like those wheels though. |
I've got it set up with what Shaik recommended alignment wise. Can't recall the #'s. I sort of did a mild roll to the front with the Eastwood tool, but I went back last night and rolled all fenders flat with a hair dryer and a 2lb sledge.
|
those tires are huge.
|
Only 16's i've ever seen that i've kind of liked. Well done. Ish.
|
Those sidewalls are HUGE. I wanted to run 225's on my 16's but didn't want a 45 series sidewall. I ended up with 215 40 16's
|
What are the specs of the rims? Those 225's look meaty as hell on them, they look like 7's
Looks very good though |
I was in Miami yesterday, I should have PM'd you.
|
Very Nice!! Not sure what makes a 45 series tire look so large??
|
Rim width and offset?
|
most likely 16x8 +10
|
16x8 +20. I think they are the perfect offset if you want to be flush with the fenders. The tires are 1" oversize from stock but this is my second set in this size and I think it works out nicely. Coming from my 16x7 grids with RS-2's these 16x8 with R1R's look much wider IMO. I did have to do a full roll on all the fenders, remove the front fender liners and massage part of the front lip. Still having a little issue rubbing the rears at the autox last weekend. Might have to look into a very mild pull to fix.
Thanks for the comments. Kind of went out on a limb with this wheel/tire combo but I'm glad i did. Michael |
I think this looks pretty F'in badass. I like it a lot.
|
1 Attachment(s)
Originally Posted by TheBandit
(Post 602864)
16x8 +20. I think they are the perfect offset if you want to be flush with the fenders. The tires are 1" oversize from stock but this is my second set in this size and I think it works out nicely. Coming from my 16x7 grids with RS-2's these 16x8 with R1R's look much wider IMO. I did have to do a full roll on all the fenders, remove the front fender liners and massage part of the front lip. Still having a little issue rubbing the rears at the autox last weekend. Might have to look into a very mild pull to fix.
Thanks for the comments. Kind of went out on a limb with this wheel/tire combo but I'm glad i did. Michael Attachment 193314 |
Sam,
Per FatCats suggestions I am running 4.5* Caster, -2* Camber (F), -1.5* Camber (R), and either 0 toe or .125 Toe Out. I still get minimal rubbing in the rear at times but it does really well at autox days. I couldn't be much happier.. Well maybe on R-comps.. :) Michael |
Thanks Michael. That thing will be even more of a beast once you get the LS6 in there with the R-comps lol. Talk about rocket ship..
|
Originally Posted by TheBandit
(Post 647868)
Sam,
Per FatCats suggestions I am running 4.5* Caster, -2* Camber (F), -1.5* Camber (R), and either 0 toe or .125 Toe Out. I still get minimal rubbing in the rear at times but it does really well at autox days. I couldn't be much happier.. Well maybe on R-comps.. :) Michael |
Originally Posted by TheBandit
(Post 602864)
16x8 +20. I think they are the perfect offset if you want to be flush with the fenders. The tires are 1" oversize from stock but this is my second set in this size and I think it works out nicely. Coming from my 16x7 grids with RS-2's these 16x8 with R1R's look much wider IMO. I did have to do a full roll on all the fenders, remove the front fender liners and massage part of the front lip. Still having a little issue rubbing the rears at the autox last weekend. Might have to look into a very mild pull to fix.
Thanks for the comments. Kind of went out on a limb with this wheel/tire combo but I'm glad i did Michael |
Those are some serious meets.
|
Originally Posted by TheBandit
(Post 647868)
Sam,
Per FatCats suggestions I am running 4.5* Caster, -2* Camber (F), -1.5* Camber (R), and either 0 toe or .125 Toe Out. I still get minimal rubbing in the rear at times but it does really well at autox days. I couldn't be much happier.. Well maybe on R-comps.. :) Michael |
Honestly, I love it. I really, want the same look. I think meaty tires with big sidewalls look soooo much better than low profile wussy tires.
|
wheels look sweet i have the REAL TE37's tho :)
|
Originally Posted by Sam Amporful
(Post 647774)
Im running the same setup and have plenty of scrubbing. Will probably roll em this weekend. I've been looking for two days for a good alignment setup with these. What are your specs?
http://i374.photobucket.com/albums/o...e/IMG_0146.jpg |
Those look great!
|
Originally Posted by TheBandit
(Post 599677)
I've got it set up with what Shaik recommended alignment wise. Can't recall the #'s. I sort of did a mild roll to the front with the Eastwood tool, but I went back last night and rolled all fenders flat with a hair dryer and a 2lb sledge.
|
All times are GMT -4. The time now is 09:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands