Notices
WTB Wanted to buy ads. Designated trademarks and brands are the property of their respective owners. forum cannot be held responsible for the outcome of any transactions.

let me know if you need any parts, mods feel free to pin the thread

Old May 17, 2009 | 07:16 PM
  #1  
zoomin's Avatar
Thread Starter
I'm Miserable!
iTrader: (16)
 
Joined: Dec 2008
Posts: 1,296
Total Cats: 0
From: where most people are Utarded
Default let me know if you need any parts, mods feel free to pin the thread

There is a local guy that typically has 10-15 mostly stock Miatas for parts to support the racing community and also builds race cars in his shop. Sometimes he even has used turbo parts sitting around. Let me know what you need and I will see if he has it, but please keep it simple and with specific parts in mind. If a moderator wants to pin this feel free. I just like to help out when I can and thought this would be helpful.
Old May 17, 2009 | 09:16 PM
  #2  
thesnowboarder's Avatar
Elite Member
iTrader: (15)
 
Joined: Sep 2007
Posts: 2,034
Total Cats: 5
From: Incline Village, NV
Default

Im in need of a 99 tps pigtail, let me know if you can snip one.
Old May 17, 2009 | 09:25 PM
  #3  
slutz4's Avatar
Senior Member
iTrader: (3)
 
Joined: Mar 2007
Posts: 566
Total Cats: 2
Default

location?
Old May 17, 2009 | 10:25 PM
  #4  
SKMetalworks's Avatar
Elite Member
iTrader: (7)
 
Joined: Jan 2007
Posts: 1,731
Total Cats: 4
From: Renton Washington
Default

i need 94-97 caliper brackets front and rear

and i need a 90-93 thermostat pigtail asap


shipping is to 98059
Old May 17, 2009 | 10:50 PM
  #5  
BradC's Avatar
Junior Member
iTrader: (6)
 
Joined: Jun 2008
Posts: 458
Total Cats: 3
From: Lansdale, PA
Default

Torsen, or other non-open rear?
Old May 17, 2009 | 11:36 PM
  #6  
zoomin's Avatar
Thread Starter
I'm Miserable!
iTrader: (16)
 
Joined: Dec 2008
Posts: 1,296
Total Cats: 0
From: where most people are Utarded
Default

I am fairly certain I can get any of the parts needed, PM me with a solid offer for what you need, keeping in mind market value. I will put together a list and call him this week, but also will be very busy getting ready to go out of town camping and hiking for the long weekend.
Old May 19, 2009 | 12:48 PM
  #7  
miatame's Avatar
Newb
iTrader: (2)
 
Joined: Sep 2008
Posts: 43
Total Cats: 0
Default

Hey Zoomin, I messaged you about some parts, did you get it?
Old May 19, 2009 | 12:56 PM
  #8  
rlogan's Avatar
Senior Member
iTrader: (21)
 
Joined: May 2008
Posts: 733
Total Cats: 17
From: San Antonio
Default

I need factory air box or at a minimum the crossover tube and misc intake pieces for a 94...
Old May 25, 2009 | 07:19 AM
  #9  
hamburger1971's Avatar
Newb
iTrader: (1)
 
Joined: Mar 2008
Posts: 35
Total Cats: 0
Default

Any chance he has tan door cards for a 99 with PW? I'll PM as well as I have a few things I'm looking for.

Thanks,

Jeff
Old May 27, 2009 | 06:45 PM
  #10  
zoomin's Avatar
Thread Starter
I'm Miserable!
iTrader: (16)
 
Joined: Dec 2008
Posts: 1,296
Total Cats: 0
From: where most people are Utarded
Default

Just got back from my trip, all PM's will be read and responded to the next day or two.
Old May 27, 2009 | 07:23 PM
  #11  
kotomile's Avatar
Elite Member
iTrader: (24)
 
Joined: Oct 2006
Posts: 7,537
Total Cats: 42
From: Monterey, CA
Default

I need the axle part from my thread

https://www.miataturbo.net/forum/t35434/

It's the little disc that pops out of the inner CV axle when the stubshafts are unbolted. Also could probably use a good condition idle valve (for a 93), or possibly a whole VTPS throttle assy while I'm at it..
Old May 28, 2009 | 12:20 PM
  #12  
mrwoolery's Avatar
Newb
 
Joined: Jan 2009
Posts: 36
Total Cats: 0
Default

I need a clutch actuator pushrod (the pushrod that goes from the clutch pedal assembly through the firewall and into the clutch master cylinder) for an NA Miata. I think they're the same for the 1.6 and 1.8 cars.

Shipped to 90603.
Old May 29, 2009 | 01:55 AM
  #13  
SKMetalworks's Avatar
Elite Member
iTrader: (7)
 
Joined: Jan 2007
Posts: 1,731
Total Cats: 4
From: Renton Washington
Default

Still havent recieved a PM... Anyone else had contact with Zoomin?
Old May 29, 2009 | 06:18 AM
  #14  
hamburger1971's Avatar
Newb
iTrader: (1)
 
Joined: Mar 2008
Posts: 35
Total Cats: 0
Default

We've traded a few PMs, though nothing's moved forward from there.
Old May 29, 2009 | 12:49 PM
  #15  
nicacus's Avatar
Senior Member
iTrader: (7)
 
Joined: Jul 2006
Posts: 1,126
Total Cats: 0
From: SLC UT
Default

You guys could just email this guy: larry@carpentermotorsports.com

Skip the middle man..

/thread
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Quinn
Cars for sale/trade
6
Oct 23, 2016 07:58 AM
russian
Miata parts for sale/trade
6
Oct 8, 2015 03:01 PM
MiataGarage
Engine Performance
5
Sep 29, 2015 11:04 PM
zephyrusaurai
Meet and Greet
2
Sep 28, 2015 10:59 PM
Voltwings
Cars for sale/trade
0
Sep 27, 2015 06:40 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:59 AM.