looking for a megasquirt2 or 3 plug and play for a 90-93 miata need urgently turns out my tuner can't tune my diyautotune megasquirt1

 

lol why not?

 

Cause he is clearly a dumb *** and says whoever put it together didn't do it right and frankly it just blows cause while I wish I could do it my self I just barely starting to grasp the concept I mouch not of the the mechanical type like building. Engines fabricating and stuff like that. But I digress any ways so I'm looking for a new one and 18 psi just wanted to say thanks you helped me quite a few times through this build and maybe you can answer one more question for me does the assembled diyautotune pnp come with a base file and will it plug into the ms1 harness I already have

 

mspnp2 plugs into your OE harness just like your stock ecu did
yes it comes with all the software. most times it will work outa the box, sometimes it will require some basic tuning to get running.

 

No I mean like the assembled ones from diyautotune that are like 450$ instead of 800 for the megasquirt one

 

These

 

Did you talk to the guy you bought the megasquirt from? See if it's been in another car before. Does the car run at all on the MS1? With the limited information you've provided I feel like there's a 90% chance your tuner doesn't know what he's doing rather than an actual hardware issue.

 

oh I'm almost sure that that's the case or that he doesn't wanna take the time to figure it out but considering I can't do it and he is the only one in my area (Utah,slc) that was willing to tune megasquirt in not left with a ton of options

 

Honestly it's not such a big loss, because ms1 is so ancient at this point that it's worthwhile to upgrade anyway.
That said, I almost never mess with non-pnp units.

Hit up Scott/Braineak for an ms3x

 

Ya that's kinda what I was thinking about it being an upgrade. Also thanks for the advice how hard is it to tune a pnp unit yourself or at least get it running and driving

 

Are braineaks pnp units I thought they were custom built ones

 

pnp

 

Highly recommended as well. He's been awesome in terms of help getting things set up and off the ground.

 

Thanks for advice everyone thanks 18psi got one ordered from him today