I need the following stuff for finishing my VVT swap in laz. I need parts cheap and shipped to 97008
A 1.8 header, prefer a 01+ or aftermarket, obviously used.

99-00 fuel rail with the little clip on line.

Engine harness plugs for the VVT solenoid, nb2 crank position sensor, and nb2 cam angle sensors. I'd prefer pigtails with at least a few inches of wire to splice into.

 

What chassis do you need the 1.8 header for?

 

its an NA6 thats getting a VVT swap.

 

So you need an NA8 header, not just any 1.8 header. I have a stock NA8 header if you dont get any other options.

 

Honestly, I could make any 1.8 header work, the exhaust can be modified if necessary.

 

So to expand our search, any 1.8 header will work on a VVT motor? It's just the intake side that is different?

 

Correct, any 1.8 header will work on any 1.8 head. But only an NA8 header will mate to an NA exhaust, and only NB header to NB exhaust. Baring any custom futzing.

 

We've successfully made a test pipe before and planned (assumed) we'd be making another. We'll be mating it up to a 1.6 racing beat midpipe, so our test pipe was always going to be the adapter.

 

This definitely opens our options up to some shitastic Ebay headers...$103 shipped!!!

 

I have the VVT engine harness from firewall out, and some from inside.
Not sure about 'cheap' though.

 

Probably more than the $12 it would cost him to just buy those connectors brand new.

 

Definitely. Of course connectors arent pigtails either.

 

i have 4 stock headers in the garage il sell you one for $80 shipped

 

Don't think I can PM yet but I have a titanium heatwrapped 2005 OEM Header for sale.

Do you need the EGR tube too? I have that as well.

 

Hey, I have 2 fuel rails for 1.8 but I can't seem to figure out what clip on line you're talking about, none of them have one attached and if i remember correctly, the line stays in the car

 

We don't need a 1.8 fuel rail, we need specifically a '99-'00 fuel rail. Do you have one?

 

I have one for you from a 2000, rail only. Pm me for a shipping quote.