WTB: Blown up 6spd Transmission
Well, not the entire transmission, just the tail housing. Somehow, my tail housing cracked and I need to replace it.
I'm looking for part number 17-330 in the attached picture. Has to be a 6spd tranny. Send me a price shipped to 40023. https://cimg6.ibsrv.net/gimg/www.mia...97757e5ac1.gif |
That's just impressive. You still running a ppf? Can't remember. Maybe you just need a BMW trans.
|
No PPF. Tranny mount bushing failure caused the problem. One the bushing failed, the tranny could move up and down with every shift. I have since changed to a Delrin bushing. BTW, I found a tail housing, so I’m good for now. |
Originally Posted by fourwhls
(Post 1511669)
No PPF. Tranny mount bushing failure caused the problem. One the bushing failed, the tranny could move up and down with every shift. I have since changed to a Delrin bushing. BTW, I found a tail housing, so I’m good for now. |
Originally Posted by slammed200
(Post 1511670)
If you end up need anything else, I have a MSM 6 speed with a bent fork and a really nice low mileage one sitting here, I'm in Indy buy can bring something down to Columbus INDIANA if needed
|
Make sure you get the correct one. The 99-00 and the 01+ have different tail shaft housings. The 01+ housing has a detent in it for the shifter control rod. The 99-00 do not.
|
I should be good. Mine is a 2004 MSM tranny and the one I found is out of a 2003.
|
All times are GMT -4. The time now is 03:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands