WTB: E-85/Flex-Fuel Conversion Bits
04-03-2017, 07:32 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2015
Location: Saint Louis, MO
Posts: 164
Total Cats: 7
WTB: E-85/Flex-Fuel Conversion Bits
The time has come to see if I can squeeze 300whp out of my old stock 1.6. Anyone have any e-85/flex-fuel conversion bits for sale? Looking for the following (or similar):
-GM flex-fuel sensor
-300lph+ fuel pump (DeatschWerks)
-1000cc+ fuel injectors (DeatschWerks)
-Innovate MTX-D ethanol content/fuel temp. gauge
Advice/suggestions/comments welcome, too!
Thanks in advance
-GM flex-fuel sensor
-300lph+ fuel pump (DeatschWerks)
-1000cc+ fuel injectors (DeatschWerks)
-Innovate MTX-D ethanol content/fuel temp. gauge
Advice/suggestions/comments welcome, too!
Thanks in advance
Reply
0
0
05-08-2017, 11:19 PM
#2
If you're still looking, I have an Innovate ECF-1 gauge kit which like the MTX-D, reads E%/Fuel Temp, AFR and also Fuel Pressure. Kit comes with all sensors and wiring except flex sensor, however, I also have a flex sensor to go along with it outside of the kit.
Save $100 on msrp, $400 shipped for it all (including flex sensor)
ECF-1 (FUEL) Ethanol Content & Air/Fuel Ratio Gauge
I also have a radium fuel surge tank with a Walbro 450 Lph pump. Use your stock pump as a pull up, and let the 450Lph provide your fueling needs. This is a bit spendy, but a real nice unit. PM if interested.
Save $100 on msrp, $400 shipped for it all (including flex sensor)
ECF-1 (FUEL) Ethanol Content & Air/Fuel Ratio Gauge
I also have a radium fuel surge tank with a Walbro 450 Lph pump. Use your stock pump as a pull up, and let the 450Lph provide your fueling needs. This is a bit spendy, but a real nice unit. PM if interested.
Reply
0
0
