WTB fuel injectors that are a direct fit for my 1.6L Miata. I'm open to options, but RX8 Yellow injectors are preferred. Must be genuine OEM parts. Thanks!

 

What is your budget?

 

PM sent.

 

I'm doing this build on as much of a budget as possible, and have someone who can clean and flowmatch for me. There are a few local sets at junk yards for $50, but I figured I'd see what was available here too, If I can skip the cleaning and flow matching

 

What are your power goals?

I think you are probably asking about flow testing. Flow matching requires someone having dozens of injectors, testing them all, and matching them into sets based on the flow rate.

 

I'd be perfectly happy with 150 to 170, with a little room above that. Just a reliable setup that doesn't break the bank. Yes, you're right, my mistake. Flow testing and cleaning, ideally so they match.

 

I have a set of stock 1.8 NB1 injectors plus another set of 1.8 NB1 injectors still connected to the complete fuel rail with bolts and spacers and all that jazz. Note sure if those plug and play into a 1.6, but they're available if they do. 30 bucks for the solo injectors, 50 bucks including the fuel rail. Both work great. Im located in the SF bay area, willing to ship either at your expense.

 

Post if you found what you’re looking for. Can’t tell from the responses and I’ve got a set of RX8 yellows if you’re still looking.

 

You might consider a set of FF380 - flow matched EV14 for those with less aggressive power goals. https://goflowforce.com/products/flo...ector-kit-nanb

 

That's a great suggestion. Once I figure out if I can live with the RX8 injectors (Which I just found a set of) I'll certainly consider those. Thanks!

 

I have stock injectors from my msm, dont know if they are plug n play.

 

I have some redtop RX7 injectors laying around.

 

Hello,

I have some FF640cc injectors!