Dann0

Decided not to risk using my RX-8 injectors (too many Chinese knockoffs around). Rather than futz around with those, I'm going to spend the coin on an injector setup that has a proven track record. Looking for a good set of plug and play injectors (that is, with pigtails if needed) by a reputable company (Injector Dynamics, Flow Force, etc). I'll be running these on a 1.6L with a hp goal of 200, tops, so big 750cc or 1000cc injectors aren't needed. Let me know what you've got. Thanks!

ByteVenom

You can score Flow Force type injectors on eBay. Junk yard take offs are common, and are usually flow tested too. I found a set of 8 for around 200$. I offered the guy a bit more than half of that for 4 injectors.
I then ordered the kit from Flow Force (tophats, pig tails etc). If you can't find anything on here, I'd recommend that route.

Shawn3737

I have a set of injector dynamic 1000cc injectors with PNP adapters with 1k Miles on them. Just pulled them out of my turbo build. I can ship them. Pm me if interested!

Dann0

Thanks for the offer! I should have updated this thread - I ended up buying the Flow Force 640cc kit, so I no longer need injectors.

Shawn3737

My bad didn't realize how old your post was haha. Sorry about that!