Looking for a Mazdaspeed Miata turbo, manifold, oil line, waterlines, water pump inlet pipe, ect. Anything in good condition. If you got one for sell let me know.

 

I have a ceramic coated manifold, if that helps.

 

Hey, I have most of what you are interested in. Last year I pulled the msm turbo bits off my msm swapped NA and upgraded to the tse borgwarner kit.

Parts I have:
Oem manifold
Msm turbo, it worked fine when removed, just wanted moar boost!
msm turbo outlet
FM msm downpipe with high flow cat
Enthuza msm midpipe and XR exhaust that had the tip and brackets modified to fit an NA
msm intercooler (if you really want it...)

I have the turbo side coolant supply fitting and hard line (banjo bolt) but cut the block side fitting off to use on my current setup

I have the oem oil drain fitting but this mates to the msm specific oil pan which I also am still using.

I have the turbo side coolant outlet fitting but re-used the msm heater tube which has the added bung for the coolant outlet.

Let me know what you parts you are interested in. I'll grab pics of everything as well.

 

Definitely send me some pictures when you can!

 

here are photos of the parts i have, i didn't find the coolant supply pipe, i cut the block side banjo off the hard line to re-use for my coolant feed. the turbo side is also a banjo bolt, same size/thread as the coolant outlet fitting.

I also have a box of small diameter (2" i think) hot and cold side tubing that was used for the previous install, most was modified from the factory tubing.

if there is something specific that you are looking for and don't see, ask and i'll see if I have it.

MSM turbo/manifold assembly

MSM turbo/manifold assembly

MSM turbo/manifold assembly

MSM turbo compressor wheel

MSM turbo compressor wheel

MSM turbo compressor flanged outlet fitting

MSM turbo coolant outlet hard line and banjo bolt. hose outlet

MSM turbo oil feed hardline. one banjo bolt included. Note: only MSM specific blocks have the oil outlet drilled and tapped for this hardline.

MSM turbo oil drain. Note only connects to MSM specific oil pan.

MSM turbo block support bracket

MSM throttle body inlet elbow

Forge aftermarket recirculation valve

MSM exhaust manifold heat shield

MSM exhaust manifold heat shield

Oil feed fitting included with TSE kit. installs between oil pressure sending unit and block, AN outlet.

FM catted MSM downpipe

Enthuza XR MSM catback

Enthuza XR MSM catback, exhaust tip shortened and hanger bracket modified for NA fitment.

MSM OEM intercooler

MSM OEM intercooler

 

m

FM catted MSM downpipe

Enthuza XR MSM catback

Enthuza XR MSM catback, exhaust tip shortened and hanger bracket modified

i have a stock msm. Will the tip be too short now? How much did you remove?