I have a 1995 Miata that I'm planning on turbocharging. Here are all the parts I'm still looking for:

1. MegaSquirt DIY PNP ECU or similar. Of course I can buy one of these new or solder it together myself, but I thought I'd ask and see if I can find a used one first. If I can't find one used I'll probably buy one from Braineack. I'll need all the associated wiring and connectors too.

2. RX-7 460cc injectors or similar.

3. Wideband O2 sensor. I don't have a strong preference, as long as it will work with a stock Miata exhaust and the MS PNP.

4. Air Intake Temperature sensor.

Let me know your price with shipping to ZIP code 80465. Thanks!

 

Hi,
I have an MSLabs MS3 that I just removed from my 95M, putting it back to stock. Current firmware is 1.4.
I ran electronic boost control and the solenoid for this will be included along with the intake air temperature sensor. You will need to source your own mounting bung for the IAT sensor as mine is welded to the intercooler. I would be looking at $700 shipped for those items. Let me know if you might be interested. I can give you other details if you have questions. Also you can check my ebay feedback under "skipstr" for reference.
Thanks,
Skip

 

I've got DW450cc injectors that came out of a 1995 setup I ran for about a year before going to ID1000cc and higher boost. Plug & play - no adapters needed.

1990-05 : 450cc Fuel Injectors | DeatschWerks

$200 shipped

I should mention I used these injectors on a stock 1994 ECU so no question they work.

 

No thanks, I can get a Brain-built PNP for less than that.

 

I might take you up on that. Stay tuned.

 

I should mention that my car uses the 1994 style two-plug ECU.

The stock ECU is part number BPL9 18 881B and it looks like this:

 

Bump. Still looking for a reasonably-priced MS PNP.

 

Bump

 

I have a lightly used AEM UEGO
$130 shipped.

 

mspnp2 came off my 94. 550 shipped