I want to buy your GReddy 15g-tdo4h turbo and exhaust manifold. I'm willing to pay $375 for the turbo and $100 for the greddy manifold. If you have ETD manifold, I'd pay $250 and the shipping for it. Does anyone want to part out with theirs? Need it in a couple of weeks. Please no shaft play or oil leaks, or cracked manifolds. Thanks a lot! PM me.

 

Any interest in a t3 manifold and turbo?

 

how much do you want for the manifold and turbo?

 

How much for the t3 manifold and the turbo? Just asking, but I really need to just replace my Greddy and manifold.

 

I have 4 different t3's, what is your goal with the car?

 

Do you have one that can fit the 1.6 T3 BEGi manifold and downpipe?

 

Most t3's have the same standard fittings, so you should be fine. What is your goal for the car?

 

I would like a smaller t3/t4 with an internal wastegate. A t3/t4 on a 1.6? I'm not looking for too much power, I just wanna replace my greddy because it's making this chirping, scraping sound.

 

I have 2 t3's with a .42 compressor/.48 turbine, 1 with a .50 compressor/.48turbine, and another with a .60compressor/.48 turbine. Other options are single or dual-port actuator, and if you want the v-band turbine outlet? Do you already have the manifold and downpipe?

 

ok, so if I get the .42 compressor and .48 turbine, I would think that the turbo would spool faster in lower rpm's than say the .60 compressor and .48 turbine.
So how much for each trim with single port actuator without the v-band... I don't have the pipping, I guess the standard silicone couplets will do.

 

On a 1.6 the .42/.48 will be plenty with the stock motor, what is your budget? And have you already purchased the manifold and downpipe from Begi? I have a new cast t3 manifold for a 1.6.

 

How much are you asking for? Because I really need a quick fix, I plan on getting the begi manifold and downpipe so that I will have less of an headache with fitment problems. That's why I orginally wanted the greddy kit turbo and manifold.

 

For the .42/.48 I'll take $180 shipped, likely keeping the other two unless someone offers me the right money.

 

Alright next question, Do you have a exhaust manifold and downpipe (maybe some gaskets too)? I'm trying to cut costs.

 

I already stated I have a manifold, but no downpipe.