Wtb: Turbo setup/build, roll bar, lightly used clutch
Close this please.
|
Bump!
Picked up a hard dog sport double diagonal roll bar today. |
Got a F1 Stage 3 Ebay clutch and PP with maybe 2K on it for a 1.6
$100 |
No 1.6 discrimination here, just put $800 into a Artech setup myself.
How cheap is cheap? I'm assuming since your not asking us about eBay setups you know not to go down that road, but are we talking a $500 used setup or $1000? |
Originally Posted by IcantDo55
(Post 854833)
Got a F1 Stage 3 Ebay clutch and PP with maybe 2K on it for a 1.6
$100
Originally Posted by curly
(Post 854858)
No 1.6 discrimination here, just put $800 into a Artech setup myself.
How cheap is cheap? I'm assuming since your not asking us about eBay setups you know not to go down that road, but are we talking a $500 used setup or $1000? I'm looking to spend around 1000$ (+/-) for everything in the list. I already have a turbo and a BOV, so that's why I think that's not a bad budget for someone who's only planning to run lowish boost and not religiously track the car. ^ Well, the MS is going to be the biggest and most expensive component of the setup... So I guess depending on how much I can pick that up for (looking to see if I can find someone upgrading to MS3 and buy a used MS2 for cheap). Any advice? |
Get a FM manifold and Fm DP. I will sell you my SR20 turbo and my FM turbine outlet. The wastegate is adjustable and set for 7psi. The turbo will be fine at 15psi. You need this shiz.
|
Originally Posted by tootrue23
(Post 855432)
I'm looking for a cheap(er) used setups. There's nothing wrong with eBay, it's only the eBay branded stuff you'd have to look out for (such as the F1 Racing clutch).
$200 or $300 added to your budget would be perfect. $710 artech ---- $300 used MS $50 used 440s low PSI you should be using an internal wastegate, do you not have one on your turbo? That's $1060, and like I said an extra $200-300 would get you your intercooler and clutch if you shop used. Seems like a lot of the crappy ebay/cracked units are the ones in the classifieds, people like hanging on to the good stuff. |
Originally Posted by thirdgen
(Post 855440)
Get a FM manifold and Fm DP. I will sell you my SR20 turbo and my FM turbine outlet. The wastegate is adjustable and set for 7psi. The turbo will be fine at 15psi. You need this shiz.
|
Originally Posted by curly
(Post 855442)
I'm speaking mostly of ebay manifolds and downpipes. There's a huge problem with them. They'll crack within weeks, if you're lucky.
$200 or $300 added to your budget would be perfect. $710 artech ---- $300 used MS $50 used 440s low PSI you should be using an internal wastegate, do you not have one on your turbo? That's $1060, and like I said an extra $200-300 would get you your intercooler and clutch if you shop used. Seems like a lot of the crappy ebay/cracked units are the ones in the classifieds, people like hanging on to the good stuff. Not too sure about the turbo, nor am I sure about anything regarding turbo setups. Like I said I'm new to the turbo scene, and the car scene in general. Appreciate the bumps and advice. |
Bump to the very top once again.
Got injectors, MS2, Rollbar and pending sale on a DP. |
All times are GMT -4. The time now is 12:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands