Standalone or compatible with control via megasquirt. PM or reply if anyone is looking to sell their setup shipped to the Chicago area. Thanks.

 

I have the Devils own stage 2 progressive kit.

the controller needs a MAP sensor voltage output though, doesnt have a vacuum port fitting or anything. When I had the 'stock' 2.5 MAP sensor I ran a wire out of the DIYPNP into the controller box and it worked fine. It will work with *any* MAP sensor, but if different than 2.5 the numbers on the dial will be off, but will still work fine.

3 and 5 gph nozzles

150psi shurflo pump

1 gallon tank, fitting to tap winshield washer fluid tank if you'd prefer that, some spare tubing, check valve, nozzle holder, everything you'd need.

pretty much like this.....but they include a 250psi pump now

http://www.alcohol-injection.com/en/...-stage-2a.html

Give me until the weekend to get all the pieces together if you're interested. How does $150 shipped sound?

 

This looks like something I am interested in. While you're getting everything together, I'll confirm I can work this with an independent map sensor or the 4bar in the mspnp.

 

It will definitely work. I've used it with a 3 bar as well. Its just looking for a 0-5V signal. If you run it with a 4 bar sensor the sticker they put on the front won't be accurate. Example... first dial I might set to 4psi start spraying, but with 4 bar now that actual psi might be 6-7.

 

Ok let's do it then. When you've got it ready, PM he Paypal info.

 

Will do. I'll send pics when able too