jeff_man

iTrader: (7)

Picking it up from usps in the morning and unless they have miss placed it again i hope to have a proper ecu installed by sunrise Tuesday =D

18psi

iTrader: (76)

Yay

jeff_man

iTrader: (7)

usps don't know where the box is.... so it's never getting installed now.

Bond

iTrader: (6)

The box will be found and it will get installed...it's just a question of how long it will take now.

jeff_man

iTrader: (7)

so the box was in a mail storage room in my building rather then taking it back to the post office for me to pick it up. i lucked out and talked to the guy who runs the room buildings mail room.

craziest wiring harness i have seen

sv650_ck

iTrader: (10)

If you have an NB, good luck getting the harness in. I ended up relocating the oem ecu to gain some room.

jeff_man

iTrader: (7)

don't even want to talk about it, it barely fit and i had to take it out and put back in the powercards to drive home

18psi

iTrader: (76)

Its a bitch to put in but not impossible. You just have to get creative

Tedsmx5

A lot easier in a RHD Miata .
Ted.

jeff_man

iTrader: (7)

i tried to use your map as a base but that failed. car did run but liek trash. Going to take the stock 1bar map and change it up a bit and see if was happens since my car currently uses the stock ecu for idle and everything there then fuel and timing retard under boost.