Aidan's loose oily bunghole actually runs a track lap
#1862
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I don't think custom tophats are feasible for any of us. If I remember correctly the corrado weren't cheap and had a lot of clearance issues. Were looking for a 4x100 circle track rotor. Thats how to stay cheap.
#1865
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
any hat is going to be expensive. they are all $100+ a piece. 949 hat is off the shelf wilwood, v8r is custom to my knowledge.
i have a few places i could have some made, but they would be as much if not more than buying them from one of the vendors, and thats before anodizing. unless of course we made 100 or something.
the bracket isnt a huge part of the kit cost, we dont save much money there. the cost savings is going to be on the calipers and or rotors.
i dont know of an of an oem caliper that we could scoop up cheap on ebay that would eliminate pad tapering. discounting some modern sports cars, they all have the same slider pin design that is responsible for the taper. so i feel we are forced into a wilwood or equivalent.
aidan/deezums challenge #1- find cheap motorsports type calipers that arnt to big and are lug mount with the right piston area. our baseline is a $150 wilwood in whatever the popular bore sizes is.
the rotor concerns are directly proportional to the amount of heat we put into them (you dont need ducts aidan). youve read OGracing's brake thread: coning, warping, etc. a lot of people get by with the import casting 11" (iirc) friction rings, so im thinking we might be able to get away with an 11"+ chinese whatever at our amateur speeds. my local tracks are especially short and easy on the brakes, i cant even fade 1.6 brake with stoptechs if i try.
challenge #2- find a 11-11.75" rotor with 4x100 pattern, and the right offset, which appears to be around 0.5". just about any centric rotor from a 4x100 car is going to be around $25. thats about $280 savings right there.
i have a few places i could have some made, but they would be as much if not more than buying them from one of the vendors, and thats before anodizing. unless of course we made 100 or something.
the bracket isnt a huge part of the kit cost, we dont save much money there. the cost savings is going to be on the calipers and or rotors.
i dont know of an of an oem caliper that we could scoop up cheap on ebay that would eliminate pad tapering. discounting some modern sports cars, they all have the same slider pin design that is responsible for the taper. so i feel we are forced into a wilwood or equivalent.
aidan/deezums challenge #1- find cheap motorsports type calipers that arnt to big and are lug mount with the right piston area. our baseline is a $150 wilwood in whatever the popular bore sizes is.
the rotor concerns are directly proportional to the amount of heat we put into them (you dont need ducts aidan). youve read OGracing's brake thread: coning, warping, etc. a lot of people get by with the import casting 11" (iirc) friction rings, so im thinking we might be able to get away with an 11"+ chinese whatever at our amateur speeds. my local tracks are especially short and easy on the brakes, i cant even fade 1.6 brake with stoptechs if i try.
challenge #2- find a 11-11.75" rotor with 4x100 pattern, and the right offset, which appears to be around 0.5". just about any centric rotor from a 4x100 car is going to be around $25. thats about $280 savings right there.
#1866
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
ive become quite the expert
Corvette and LS1 brake swaps how to and info - S-10 Forum
#1872
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
https://www.miataturbo.net/attachmen...rs-bracket.jpg
from
https://www.miataturbo.net/suspensio...-rotors-28219/
but the caliper is icky
from
https://www.miataturbo.net/suspensio...-rotors-28219/
but the caliper is icky
#1874
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p></p><p>lololol like this will ever happen</p><p>Vent window installed. Thanks for the sticker <span>@revlimiter</span></p><p><br /></p>
#1878
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
You guys should use the search feature more often: https://www.miataturbo.net/race-prep...corrado-68784/
I need to go install my vent windows
I need to go install my vent windows