Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!
#2666
The tko is a damn good trans, we run a kit car cobra on one. shifts smooth, take all the abuse you can throw at it. should be good for your application, if you can get all the details worked out. here is a good bit of info about the tko 500 & 600.
http://www.5speedtransmissions.com/tr-3550.html
http://www.5speedtransmissions.com/tr-3550.html
#2667
A good brake and clutch shop should be able to put new hubs on his current discs.
Driveshaft-
http://southwestspeed.com/?sec=view_...um+Driveshafts
Rear flange-
http://www.grannysspeedshop.com/
The Miata flange is the same size as an NA FC flange.
If he's serious about trying to make and hold serious power, it'd be a good time to get a 7.5 rear end before he chunks the 3.6 Miata rear.
Min-Why 8500 rpm? Drop it to 7500-7800 and you'll make shifting easier and engine life will improve.
Driveshaft-
http://southwestspeed.com/?sec=view_...um+Driveshafts
Rear flange-
http://www.grannysspeedshop.com/
The Miata flange is the same size as an NA FC flange.
If he's serious about trying to make and hold serious power, it'd be a good time to get a 7.5 rear end before he chunks the 3.6 Miata rear.
Min-Why 8500 rpm? Drop it to 7500-7800 and you'll make shifting easier and engine life will improve.
#2669
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
I can get new discs with splines for pretty much everything from Competition Clutch for $200 total.
Yeah, the custom or chpnmwnws66's link is $300
8500RPM? Because of powerband. Turbo spools late.
I think I need to take a serious pause and re-examine my build. Honestly, I think that if I am going to spend $2000-$3000 more on a driveline, I probably should not have it centered around the BP motor.
Obviously though, I have sunk a large amount of money into that platform. Motor, mani, dp, IC, exhaust etc... Maybe I should lower my sights a little bit and aim for 500ish. Regular ol' six speed should be able to support that. Maybe I should do a dyno with my turbo, then put on a six speed and a sm sm ugh can i say it? smaller turbo.
Yeah, the custom or chpnmwnws66's link is $300
8500RPM? Because of powerband. Turbo spools late.
I think I need to take a serious pause and re-examine my build. Honestly, I think that if I am going to spend $2000-$3000 more on a driveline, I probably should not have it centered around the BP motor.
Obviously though, I have sunk a large amount of money into that platform. Motor, mani, dp, IC, exhaust etc... Maybe I should lower my sights a little bit and aim for 500ish. Regular ol' six speed should be able to support that. Maybe I should do a dyno with my turbo, then put on a six speed and a sm sm ugh can i say it? smaller turbo.
#2670
Welcome to hot rodding and the constant conflict in it.
You can have your cake and eat it too, but its going to cost a pretty penny. A smaller turbo that doesn't have to spin to 8500 to make power might not be a bad thing if you want a comfortable reliable street car. If your doing this for dyno numbers, then keep the big turbo.
You can have your cake and eat it too, but its going to cost a pretty penny. A smaller turbo that doesn't have to spin to 8500 to make power might not be a bad thing if you want a comfortable reliable street car. If your doing this for dyno numbers, then keep the big turbo.
#2672
I can get new discs with splines for pretty much everything from Competition Clutch for $200 total.
Yeah, the custom or chpnmwnws66's link is $300
8500RPM? Because of powerband. Turbo spools late.
I think I need to take a serious pause and re-examine my build. Honestly, I think that if I am going to spend $2000-$3000 more on a driveline, I probably should not have it centered around the BP motor.
Obviously though, I have sunk a large amount of money into that platform. Motor, mani, dp, IC, exhaust etc... Maybe I should lower my sights a little bit and aim for 500ish. Regular ol' six speed should be able to support that. Maybe I should do a dyno with my turbo, then put on a six speed and a sm sm ugh can i say it? smaller turbo.
Yeah, the custom or chpnmwnws66's link is $300
8500RPM? Because of powerband. Turbo spools late.
I think I need to take a serious pause and re-examine my build. Honestly, I think that if I am going to spend $2000-$3000 more on a driveline, I probably should not have it centered around the BP motor.
Obviously though, I have sunk a large amount of money into that platform. Motor, mani, dp, IC, exhaust etc... Maybe I should lower my sights a little bit and aim for 500ish. Regular ol' six speed should be able to support that. Maybe I should do a dyno with my turbo, then put on a six speed and a sm sm ugh can i say it? smaller turbo.
is FAEFLORA, the notorious BIG turbo crusader who has been preaching about how ghey small turbos are in just about every thread and bashing the community for sticking to their t25s 28's and small t3 frame turbos ACTUALLY saying what I think he's saying?
Am I reading this right?
you're considering LESS POWER?
WHO ARE YOU AND WHAT DID YOU DO WITH OUR DERICATE FAIRY FROWER?
#2673
Wait wait wait, HOLD THE F* UP NOW:
is FAEFLORA, the notorious BIG turbo crusader who has been preaching about how ghey small turbos are in just about every thread and bashing the community for sticking to their t25s 28's and small t3 frame turbos ACTUALLY saying what I think he's saying?
Am I reading this right?
you're considering LESS POWER?
WHO ARE YOU AND WHAT DID YOU DO WITH OUR DERICATE FAIRY FROWER?
is FAEFLORA, the notorious BIG turbo crusader who has been preaching about how ghey small turbos are in just about every thread and bashing the community for sticking to their t25s 28's and small t3 frame turbos ACTUALLY saying what I think he's saying?
Am I reading this right?
you're considering LESS POWER?
WHO ARE YOU AND WHAT DID YOU DO WITH OUR DERICATE FAIRY FROWER?