GReddy miata
#1
GReddy miata
The car is an -93 1.6 "eunos". Bought it last summer with the stock greddy turbo installed, allmost else stock.
Some specs from the car:
-MsPnp
-Cometic headgasket
-Greddy turbo
-Intercooler
-Innovate lc1
-2,5" exhaust + custom dp
-oil cooler
-52mm rad
-Coolant reroute
-walbro fuelpump
-act clutch
-blitz bow
-Stock pistons, rods etc
Engine bay
Dyno chart, 202 horsepowers / 284,8 newtonmeters
Xxr wheels with federal 595 rs-r tyres, recaro seats, cage, stripped interior, etc.
More pics behind the link:
http://sasu.kuvat.fi/kuvat/Mazda%20Eunos/
Last edited by sasu`; 05-20-2012 at 04:09 PM.
#11
The cage is ordered from t.r. lane : http://www.trlane.co.uk/
I'd think it fits with the hardtop, but you can ask from Tim Lane.
I'd think it fits with the hardtop, but you can ask from Tim Lane.
#15
I broke the 5-speed transmission, so I'm thinking of upgrading the engine to 1.8l from 2001, with the 6-speed transmission.
Don't think i will need other parts than motor mounts and the intake manifold? Thinking of doing the exhaust manifold myself, and the throttle body adapter.
How about the drive shaft, will the current one do?
Don't think i will need other parts than motor mounts and the intake manifold? Thinking of doing the exhaust manifold myself, and the throttle body adapter.
How about the drive shaft, will the current one do?
#16
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,612
Total Cats: 567
I broke the 5-speed transmission, so I'm thinking of upgrading the engine to 1.8l from 2001, with the 6-speed transmission.
Don't think i will need other parts than motor mounts and the intake manifold? Thinking of doing the exhaust manifold myself, and the throttle body adapter.
How about the drive shaft, will the current one do?
Don't think i will need other parts than motor mounts and the intake manifold? Thinking of doing the exhaust manifold myself, and the throttle body adapter.
How about the drive shaft, will the current one do?
However if its a 2001 motor, IIRC that has VVT. You need to either figure out a way to control that, or get a 1999-2000 head for the swap.
Someone else might have more info though. Why not just drop in another 100 dollar transmission?
Car looks nice though, how is that cage with headroom?
#19
Drove the car in my garage at november and swapped the engine, gearbox and rear end.
The engine is now an -02 vvt, gearbox is 6-speed and the rear is an 3.63 ratio torsen.
Got new wheels, rota's (wanted 6ul:s but got these cheap...)
The only part I'm waiting is an greddy axial replacement turbo manifold from abe... After that I can go for a test drive
The engine is now an -02 vvt, gearbox is 6-speed and the rear is an 3.63 ratio torsen.
Got new wheels, rota's (wanted 6ul:s but got these cheap...)
The only part I'm waiting is an greddy axial replacement turbo manifold from abe... After that I can go for a test drive