Aidan's loose oily bunghole actually runs a track lap
#6061
Where's the other end of that thing go? oil sender? Couldn't you get a NPT to 4AN adapter, then just use this? It's what I did to replace the cheap DIY AN stuff I made.
42" Braided Steel Brake Line 4AN Line with 4 An Staight 90 Ends ALL46402 42 | eBay
42" Braided Steel Brake Line 4AN Line with 4 An Staight 90 Ends ALL46402 42 | eBay
#6065
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Thnx guise.
I've been spending some time in the HPDE safety thread, and want some head containment. A full containment seat is probably out of the question but I'm thinking about running left and right drivers nets. Tied to the roll bar and harness bar. I think that will be easily installable for track days. Yet still provide good containment.
Those plus my Hans will really help me be safer in case of a crash.
EDIT: oh crap, i don't want to post anymore. 10k looks so good.
I've been spending some time in the HPDE safety thread, and want some head containment. A full containment seat is probably out of the question but I'm thinking about running left and right drivers nets. Tied to the roll bar and harness bar. I think that will be easily installable for track days. Yet still provide good containment.
Those plus my Hans will really help me be safer in case of a crash.
EDIT: oh crap, i don't want to post anymore. 10k looks so good.
Last edited by aidandj; 01-20-2016 at 02:34 PM.
#6077
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Possibly. This is a work plotter, and I really don't know what the personal use policy is. Let me ask around.
I can definitely mail you this one when i'm done with it.
I can definitely mail you this one when i'm done with it.
#6080
Are any of ya'll good at 3d modeling, the artsy-fartsy triangles kind?
This is made of surfaces and it's not scaled right. Solidworks doesn't like dealing with too many triangles. So, what I need to do is get rid of all the triangles I don't want and resave the model, then I can make solidworks move it's lazy *** and put data to triangle points. The magic number is 25K, I think?
This is made of surfaces and it's not scaled right. Solidworks doesn't like dealing with too many triangles. So, what I need to do is get rid of all the triangles I don't want and resave the model, then I can make solidworks move it's lazy *** and put data to triangle points. The magic number is 25K, I think?