Aidan's loose oily bunghole actually runs a track lap
#7421
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Thanks Ryan.
I think I remember not being able to swap pulleys, so I guess I'm looking for an alternator too.
On another note, picking this up today.
I think I remember not being able to swap pulleys, so I guess I'm looking for an alternator too.
On another note, picking this up today.
#7423
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I do. Currently figuring out wiring.
https://www.amazon.com/Hopkins-43755.../dp/B0002RNSIM
Looks like that will work really well.
https://www.amazon.com/Hopkins-43755.../dp/B0002RNSIM
Looks like that will work really well.
#7425
Originally Posted by aidandj
I do. Currently figuring out wiring.
https://www.amazon.com/Hopkins-43755.../dp/B0002RNSIM
Looks like that will work really well.
https://www.amazon.com/Hopkins-43755.../dp/B0002RNSIM
Looks like that will work really well.
#7430
Interesting that it's got the tires on the front. When I built mine (many, many years ago, long since sold) I put the tires on the back, that way when I was at the autox and I'd removed the tires (but still had the box full of tools and stuff), the trailer didn't want to flip over backwards.
--Ian
--Ian
#7431
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
The seller made sure to tell me that if you take the tires of it will flip up and break off the lights. Which is why the lights have been replaced once before.
#7433
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Not bad. This one has a pretty trick gas can holder. I won't be carrying tires right now. Mostly just camping gear and stuff.
Currently searching for some padlocks for the bucket.
Currently searching for some padlocks for the bucket.
#7437
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I like that idea. I'll look into it.
In other news. Got some quotes back on head flanges. Looks like 316SS will be happening. With 321 runners.
Also spoke to Evan (wittyworks) and I will be making more than one of these manifolds. If anyone else wants EFR low mount goodness.
In other news. Got some quotes back on head flanges. Looks like 316SS will be happening. With 321 runners.
Also spoke to Evan (wittyworks) and I will be making more than one of these manifolds. If anyone else wants EFR low mount goodness.